Hexagon Sewing Case Video Workshop
Step by step video lessons to walk you through how to make a hexagon sewing case.
What's covered in this workshop?
The Hexagon Sewing Case Video Workshop is a series of 13 pre-recorded video lessons, over 2 hours in total, that walk you through how to make the case from start to finish. You can pause, rewind and rewatch the videos as often as you need. Each step is explained in detail with clear, close up visuals to guide you through. I am also on hand to help with any questions. The class was designed to go hand in hand with the PDF pattern for the sewing case, which can be found here. If you haven't already purchased a copy of the pattern, you will need to, before taking this class.
What you will need
To take this class, you will need to purchase the PDF pattern which can be found here.
You will also need:
• Main fabric- (for the front and back covers of the case) you will need 45” x 11” cotton fabric.
• 20” x 12” of Pellon Flex-Foam or Vilene Style-Vil or wadding/batting
• Zip pocket - 21” x 11” cotton fabric and 21” x 11” medium weight iron on interfacing
• Open pockets - 30” x 20” cotton fabric and 30” x 20” medium weight iron on interfacing
• An 8” / 20cm zip
• A button
• Elastic
• 70” of bias binding, 5/8" wide.
Depending on which design you choose for the covers, you will also need paper or hexiform shapes and fabric scraps. This is detailed in the pattern.
Course curriculum
-
Introduction
-
Lesson 1 - English Paper Piecing and Embroidery
-
Lesson 2 - Making the front and back covers
-
Lesson 3 - Making the zip pocket
-
Lesson 4 - Open Pockets
-
Lesson 5 - Finishing Touches
-
Feedback
