If your Dyson is struggling to pick up dust and dirt then it might be suffering from a loss of suction. This can make cleaning floors a pain.

How to fix the suction on Dyson? To fix this issue there are a few things you can check and do to get your vacuum back to working properly. Firstly you should check all the filters on your Dyson vacuum.

1. Filters

When you have a Dyson vacuum cleaner and it’s not sucking up dirt like it used to, the first thing you need to do is check your filters. Dirty filters will not allow air to pass through them, and that can cause your vacuum to lose suction power.

The next step is to remove the filters and wash them. It’s important to clean the filters regularly because it will help your vacuum cleaner perform better and last longer.

Once your filters are clean, leave them to dry completely. The Dyson team recommends giving your filters at least 24 hours to dry before putting them back in your vacuum.

If your Dyson vacuum is losing suction power, it’s likely because there is something stuck inside the hose or attachments. If there’s a clog or hole in the hose or attachment, you’ll need to replace it to get your vacuum working again.

2. Bin

A Dyson vacuum cleaner works by spinning the air so fast that centrifugal force flings dust and dirt out of it. However, if the bin is filled with debris it will weaken the suction power and your Dyson may stop working altogether.

You can check the suction strength by removing the clear bin from your Dyson and using your hand to feel the suction at the base. If it is strong, the blockage is likely within your vacuum's hose or the extension wand.

Another common problem is that the bin release button is stuck. This can be caused by a build up of crumbs and dust on the lid which may clog the button.

The easiest way to fix this is by replacing the bin runner. It's an inexpensive part that can be found in your local hardware store. Once fitted, you'll be able to empty your Dyson easily again. If the problem continues, it's a good idea to take it to a specialist.

3. Brush Bar

Dyson vacuum cleaners are renowned for their ability to pick up dirt and agitate it off floors, thanks to strong suction power. But sometimes, a Dyson will have issues that need to be fixed before the machine stops working properly and starts to clog up with grime.

For example, if the brush bar doesn’t spin effectively, it’s likely that it’s dirty and encased in long strands of hair or pet fur. Or, the transmission rod that drives the brush bar through the cleaning head could be faulty or stuck.

In these cases, it’s important to fix the issue right away. The faster you do so, the more likely it is that your vacuum will continue to function well.

The best way to get at the problem is to examine the paths through your wand, hose and valve pipe. This will help you find and remove any blockages that may be causing the machine to stop working. It’s also important to empty your vacuum bin on a regular basis, so that you can avoid any buildup of debris that may impact its function.

4. Motor

There are a few different reasons why your Dyson vacuum can lose suction. Some of the most common problems include an incoming power problem, a blockage in the airflow and a motor fault.

The first thing you should check for is an incoming power supply issue. This is particularly true if you have a corded model.

To fix this, unplug your vacuum from the wall socket and inspect it for any signs of incoming power failure. If you have a cordless model, ensure that the battery is fully charged and ready to go.

Next, inspect the powerhead, hose, and wand to check for any blockages or debris. Once you've inspected each part, empty the vacuum's bin and clean it thoroughly.

A full bin can restrict airflow, which in turn can cause a loss of suction. Once you've emptied the bin, give your machine an hour to cool down and then turn it on again. This will help to fix your Dyson vacuum's suction problems.