24 Snowflake Ornaments – 3D Print Files (STL, flat, no supports)

24 Snowflake Ornaments – 3D print files (STL)

24 original snowflake ornaments that print flat in a few minutes each, with no supports. Every design is one connected piece with a built-in hanging loop, ready to hang on the tree, tie onto a gift or string into a garland.

What you get

- 24 STL files, one per design (ZIP download, about 1 MB)

- Print notes and licence (TXT)

Print details

- Flat pieces, 3.0 mm thick, about 90 mm across, 4 mm hanging hole

- No supports needed; every mesh checked watertight

- About 4.7–7.7 g PLA per ornament

- Suggested: PLA or PETG, 0.2 mm layers, 3 walls, 15–20% infill (or 100% for stiffer pieces)

- Scale freely in your slicer; 70–120 mm works best. Below 70 mm the thinnest arms get fragile

- Two-colour idea: pause at 2.4 mm and swap to white or glitter filament for the top layer

Good to know

- This is a digital download of 3D model files. Nothing physical is shipped; the images are renders of the models, not photos of real prints.

- You need access to a 3D printer (FDM is fine) and a slicer such as PrusaSlicer, Cura or Bambu Studio.

- Licence: personal use. You may sell up to 500 printed ornaments per design that you print yourself. Please don't share, resell or re-upload the STL files or remixes of them.

Support

Questions? gallery@brightsheetsstudio.com – Bright Sheets Studio

Instant digital download. By purchasing you agree the download starts immediately, which waives the 14-day withdrawal right for digital content.