Splatoon 1 Ink Tank 3D Printable STL Files | Cosplay Prop DIY

Splatoon 1 Ink Tank – 3D Printable STL Files (Digital Download)

Complete your Inkling cosplay with the iconic Splatoon 1 Ink Tank! This listing includes high-quality digital 3D models ready for immediate download and printing. The model is smartly split into separate pieces so you can print each part directly in the correct filament color, then assemble them with glue and hardware.

📦 What's Included:

• Standard Version digital STL files.
• New/Updated Version digital STL files.

🛠️ Hardware & Materials Required (Not Included):

To complete this prop, you will need to source the following materials:

For the Standard Version:

• Screw & Nut: 1x M4 or M5 x 50mm screw with a nylon-insert lock nut (dado frenato).
• Clear Cylinder: 1x clear Plexiglas (or similar clear plastic) sheet, 0.7mm to 0.8mm thick, measuring 34.4 x 36.9 cm.
• Assembly Tip: Roll the clear sheet into a cylinder and glue it along the marked white seams. Before gluing the TopClips, test the alignment to ensure the side clips snap into place perfectly.

For the New/Updated Version:

• Screw & Nut: 1x M4 or M5 x 50mm screw with a nylon-insert lock nut.
• Clear Cylinder: 1x clear Plexiglas (or similar clear plastic) sheet, 0.7mm to 0.8mm thick, measuring 37.5 x 40.8 cm.
• Extra Hardware: 2x small screws to secure the bottom side.
• Assembly Tip: Roll the clear sheet into a cylinder and glue it along the ten marked white seams using plastic-safe glue.

⚠️ IMPORTANT - PLEASE READ BEFORE PURCHASING:

• DIGITAL DOWNLOAD ONLY: This listing is strictly for digital STL files. No physical item will be shipped.
• TERMS OF USE (PERSONAL USE ONLY): These files are for personal, non-commercial use only. Reselling, sharing, or commercial production of physical prints is strictly prohibited.

📧 Support:

If you have any questions, troubleshooting issues, or need help with assembly, feel free to contact me anytime!