To take this class, you will need to purchase the PDF pattern which can be found here.

You will also need:

• 12" x 20" double sided fusible foam. I use ¼” thick foam called Legacy Flex-Foam
• 14" x 22" felt for the inside - wool felt works best as it adheres to the fusible foam and is harder wearing than acrylic felt. You could substitute this with cotton fabric.
• 14" x 22" cotton for the outside
• 28 x 2" clamshells (either paper or Hexiform)
• 10" x 6" Hexiform or paper for the door, windows and curtains 
• Fabric scraps for the clamshells and windows and door. For each clamshell you’ll need at least a 3" square piece of fabric.
• 21mm snap fastener
• A strip of fabric 3" x 44" for the straight binding. You could join two pieces of fabric to achieve the required length.
• 27" of bias binding that is ¾” wide.
• A strip of fabric 3" x 13" for the roof appliqué 
• 12 ½” x 14 ½” fabric for the large open pocket
• 12 ½” x 12 ½” fabric for the small open pocket
• 12 ½” x 15" fabric for the zip pocket
• Two, 3" x 1 ½” fabric for the zip tabs
• 10" zip
• 35" x 13" and 15" x 13" medium weight iron on interfacing
• Sewline glue pen
• Hand sewing needle and thread. I use size 10 milliners needles and Wonderfil Invisafil or Deco Bob Thread
• Scissors, pins, an iron, fabric pen and a sewing machine