Aristocats Marie

This bundle includes a matching: ✨ 12 oz Can Cooler ✨ Straw Topper ✨ Can Opener

Designed for Bambu Lab AMS multi-color printing, each piece is made to coordinate perfectly for a fun, themed drink accessory set. Whether you're printing for yourself or gifting to another fan, this bundle is sure to bring a smile.

🎨 Features: • AMS-ready 3MF files • Matching accessory bundle • Clean, beginner-friendly prints • Optimized for vibrant multi-color results

💙 Commercial Use: You may sell physical prints made from this design. Reselling, sharing, or distributing the digital files is not permitted.

⚠️ Digital files may not be shared, resold, modified, or redistributed.

🖨️ PRINTING TIP — SHORTEN YOUR PRINT TIME

To help cut down the long print time on the coozie, start the print at Normal speed for the first 30 minutes. This gives the base layers plenty of time to get good adhesion and establish a solid foundation.

After the first 30 minutes, you can increase your Bambu printer speed to:

🏎️ Sport Mode — Faster with a good balance of speed and quality

🚀 Ludicrous Mode — Fastest option if your printer/filament is handling the print well

I personally recommend keeping an eye on the print for a few minutes after increasing the speed to make sure everything is printing smoothly.

Always start on Normal then let her rip! 😂

Print times shown in the slicer are based on Normal speed, so your actual completion time may be considerably shorter when using Sport or Ludicrous mode.