Grab & Go and Grab & Go Revolve PDF Sewing Pattern
Grab & Go and Grab & Go Revolve are simple projects suitable for beginner bag makers. Grab & Go is a crossbody approximately 9” (22.75cm) in height, 7.5” (19cm) in width, and Grab & Go Revolve is approximately 8” (20cm) in height, 10.5” (26.5cm) in width. Grab & Go has an exterior slip pocket and a single top zip closure. Grab & Go requires one zipper for the top closure, and either two D rings and two lobster/swivel clasps, or two rectangle rings, and a triglide for the straps. Optional rivets can also be used to add extra strength and security to the strap and strap connectors as per your preference.
Grab & Go can be made in a variety of fabric bases, including woven cotton, canvas and vinyl, and it is recommend to interface all woven and canvas exterior pieces in full using a lightweight woven interfacing. Grab & Go can also be made with a clear vinyl pocket, and instructions for using this base are also included. This project can be made by printing the pattern pieces, or just by using the measurements which are included in both the Grab & Go and Grab & Go Revolve patterns.
This pattern comes with a photo tutorial and a full video tutorial is also available to accompany the pattern on our youtube channel
https://www.youtube.com/@backstitchandbastepatterns
Please note you are purchasing a PDF printable sewing pattern. This is not a finished project.
Supplies List Grab & Go
Fabric measurements are approximate and allow for a slight extra to ease cutting
30” wide by 10” tall 76cn wide by 25.5cm tall) of Exterior Fabric
24” wide by 10” long (51cm wide by 25.5cm long) of Interior/Lining Fabric
Optional Woven Interfacing as per above (for fabric exterior pieces)
Two 1” (2.5cm) rectangle rings or two 1” (2.5cm) D rings and two 1” (2.5cm) lobster/swivel clasps
One 1” (2.5cm) triglide/slider
One 7” (17.75cm) piece of size 5 zipper tape and pull
Optional - rivets as per preference
Optional - 6.25” (16cm) of bias binding/fold over elastic for covering the
top edge of your clear vinyl pocket.
For the strap: (please use your preferred length)
56”-60” (142-152cm) x 4” (10cm) exterior fabric OR 56”-60” (142-152cm) of 1” (2.5cm) webbing
Supplies List Grab & Go Revolve
30” wide by 10” tall 76cn wide by 25.5cm tall) of Exterior Fabric
24” wide by 10” long (51cm wide by 25.5cm long) of Interior/Lining Fabric
Optional Woven Interfacing as per above (for fabric exterior pieces)
Two 1” (2.5cm) rectangle rings or two 1” (2.5cm) D rings and two 1” (2.5cm) lobster/swivel clasps
One 1” (2.5cm) triglide/slider
One 10.25” (26.5cm) piece of size 5 zipper tape and pull
Optional - rivets as per preference
Optional - 9.75” (24.75cm) of bias binding/fold over elastic for covering the
top edge of your clear vinyl pocket.
For the strap: (please use your preferred length)
56”-60” (142-152cm) x 4” (10cm) exterior fabric OR 56”-60” (142-152cm) of 1” (2.5cm) webbing