Black P-seal Small

Black patent leather sealer designed for black Patent Leather Repairs BLACK HIGH GLOSS & flexible 

INSTRUCTIONS 

How to use

⚠️ please keep your airbrush gun submerged in soapy 🧼 water while using patent leather paint or gloss . Patent leather gloss & paint can cause extreme clogs. ⚠️

1. Shake well before using and allow gloss to settle without any major air bubbles
2. Sand the effected area with 320 grit sand paper to 400 grit sand paper before spraying to ensure the best coverage
( sanding grit of choice will depend on the damage ) 320 -400 is recommended for moderate damage recovery.
3. Remove all debris from surface before applying gloss
4. On your airbrush gun please pull your needle back & lock it in place inside your air nozzle for maximum spray and coverage. You should not be able to see your needle poking out of the air nozzle on the tip of your gun before spraying .
5. Spray 1-2 inches away from the sneaker spray around the shoe in one motion making a rotation of 360 degrees around the sneaker until a solid glossy coat appears.
6 . Dry with a hair dryer on medium heat to seal the top coat and avoid any debris or air pockets from forming
7 . Allow gloss to air dry for 10-24 hours before touching or bending

For minor scuffs or scrapes simply sand the effected area & regloss with Footprinse P-Seal
Please view video tutorial in photos or preview.
For finishing or transitioning custom colors as well



Please use in a well ventilated area and wear a respirator mask
chemicals In Sealer are know to cause cancer in the state of California