Wooden Christmas Angels - SVG + DXF Cut Files (11, 9 and 7 inch, Hearts Included)

Wooden angels: CNC and laser cut files from The Chalk Shop

A trio of standing wooden angels in three sizes — 11", 9" and 7" tall. Each angel is two pieces, a body and a set of wings that sit behind it, plus a hanging heart with a hole for twine. All three angels and all three hearts are on the same sheet, so you only open one cut file. They look great on a mantel, shelf or table, and make good farmhouse Christmas decor or craft-fair items.

The first two photos are of angels cut from these files. The lifestyle photos and the video are staged images.

WHAT YOU GET (instant digital download, one ZIP)

- 3 angels: 11", 9" and 7" tall, each with a body and a wing piece

- 3 hanging hearts on the same sheet, 2.00", 1.75" and 1.50" wide, each with a 0.20" hole for twine

- A LightBurn-ready SVG, an inch DXF and an mm DXF (true scale, closed outlines, CUT and ENGRAVE layers)

- A README with sizes, assembly and finishing notes

SIZES (overall W x H per piece, inches)

- 11" angel: body 4.06 x 11.00, wings 5.11 x 11.00, heart 2.00 x 1.92

- 9" angel: body 3.32 x 9.00, wings 4.18 x 9.00, heart 1.75 x 1.68

- 7" angel: body 2.58 x 7.00, wings 3.25 x 7.00, heart 1.50 x 1.44

- Sheet for the full set: about 27.5" x 11.8"

(mm sizes are in the mm DXF.)

PURCHASED SEPARATELY

Wood half-rounds (split balls) for the faces, twine for the hearts, and finishing materials such as paint and fabric are not included and are not cut from the file. A blue engrave circle on each face shows where to glue the half-round. Recommended sizes: 2" for the 11" angel, 1-1/2" for the 9" angel, and 1-1/4" for the 7" angel. A slightly smaller half-round is fine; you will just see a little more of the plywood face around it.

MATERIAL

Designed for 1/4" to 1/2" plywood (the original pieces were cut from thin plywood, about 1/4"). There are no slots to match to thickness. Cut at true scale; do not resize the file if you want the 11", 9" and 7" finished heights.

MACHINE NOTES

- Laser: Cut layer = black (line/cut), Engrave layer = blue (line/engrave) for the half-round placement circles on each face. Engrave first, then cut. Check your bed size: the sheet is about 27.5" x 11.8". Adjust for kerf.

- CNC router: use a 1/8" (3.175 mm) end mill. Cut the heart holes first, then the outlines, and use tabs.

ASSEMBLY

Cut one body, one wing piece and one heart per angel. Glue or tack the wings behind the body. Glue a wood half-round on the face, on the engraved circle. Tie the heart around the neck with twine. Finish as you like (paint, fabric, distress the wings). Half-rounds, twine and finishing materials are purchased separately.

DIGITAL DOWNLOAD NOTICE

This is a digital file. No physical item will be shipped. Your download link appears right after checkout and is also emailed to you.

Personal and small-business use of the finished cut pieces is OK under The Chalk Shop terms. Please don't resell, share or redistribute the digital files themselves.

Message me if you'd like any personalizations, starting at CA$10.