Pittsburgh Hockey Inspired - SID THE KID) LED Puck Lamp

Real proud of this one! The legend Sid the Kid!

I added a oversized puck base in the files as well as the original base.

Puck print takes about 2-3 hours but i think its worth it and really adds to the lamp.

Used a Bambulab Silk Gold for the yellow and I think it turned out great.

Also the shade takes a little bit longer but i really think it's worth the wait. Designing the collage took a little bit longer but I am really proud of this one.

Create your own Sid the kid LED display lamp with this downloadable 3D print file.

Designed as a unique tabletop display piece, this lamp stands approximately 9.5 inches tall with a 5.10-inch diameter shade. The detailed illuminated shade features a dimensional hockey-inspired design that comes to life when lit, while the bold blue-and-white base makes it a great addition to a desk, office, game room, fan cave or display shelf.

This listing is for the DIGITAL FILES ONLY. No physical lamp, LED light, filament or other physical product will be shipped.

Finished Dimensions

• Approximate overall height: 9.5"
• Approximate shade diameter: 5.10"
• 

Recommended Print Settings

• Material: PLA
• Layer height: 0.16 mm
• Nozzle: 0.4 mm recommended
• Print at a moderate/slower speed to preserve the fine details in the shade and base
• Use good bed adhesion and a properly calibrated printer for the cleanest finish
• White or light-coloured PLA is recommended for the illuminated shade to achieve the best light transmission and detail

Print settings may require minor adjustments depending on your printer, filament brand and slicer.

Digital Download Includes

• 3D printable files required to create the lamp
• Printable lamp base and components
• Detailed illuminated shade design

The finished lamp is designed to be paired with a compatible LED light source. An adjustable LED light with brightness and colour-temperature control works especially well, allowing you to switch between a soft warm glow and a brighter neutral light.

Please Note

This is a digital product. You will receive downloadable 3D printing files and will need access to a 3D printer, PLA filament and compatible LED lighting hardware to complete the lamp.

Actual print results may vary depending on printer calibration, filament, slicer settings and printing environment.

Unless otherwise stated in the included licence, purchasing these files does not grant permission to redistribute, share, upload or resell the digital files themselves.

Perfect for Penguins fans, sports-themed rooms, desks, offices, game rooms, fan caves and anyone looking for a unique 3D printing project.