Shim Stack Workbook — Suspension Damping Force Calculations
What force will your shim stack produce?
Follow the calculations from spring rate and damping targets through shim stiffness, oil flow and pressure to estimated damping force at shaft velocity.
Created by Craig Dixon at Mountain Race Shop for suspension technicians, workshop owners and experienced DIY builders.
A CLEAR PATH THROUGH THE CALCULATIONS
• Spring rates, wheel rates and damping targets
• Rider skill scaling, with worked comparisons
• Shim stiffness, opening and force
• Oil flow, fixed bleed and port pressure losses
• Compression and rebound force calculations
• Worked examples that reach a force-versus-velocity result
WRITE IN THE BOX AND FOLLOW THE NUMBERS
Clearly labelled GET and COPY TO instructions identify where each input comes from and where each result goes next. Job boxes are left blank for your measurements; worked examples show the method.
FOR WORKSHOP LEARNING AND REFERENCE
Understand proposed stack changes, record your reasoning and train new or experienced technicians. The method focuses on motorcycle forks and shocks. Calculated outputs depend on the geometry, coefficients and modelling assumptions entered.
WHAT YOU RECEIVE
Printable PDF digital download — AUD $37. Download after purchase and print at A4, actual size. This is a write-in calculation workbook, not an automatic software calculator.
TRANSLATED COPIES ON REQUEST
Contact Craig with your preferred language using the store’s Contact page.
For a deeper technical reference, see Shim Stack Engineering. Browse all books at https://payhip.com/MountainRaceShop