Consultant expert Dr. Mohamed Taha aalco-stainless-steel-tube-product-guide
Consultant expert Dr. Mohamed Taha
aalco-stainless-steel-tube-product-guide
The information contained herein is based on our present
knowledge and experience and is given in good faith.
However, no liability will be accepted by the Company
in respect of any action taken by any third party in
reliance thereon.
As the products detailed herein may be used for a wide
variety of purposes and as the Company has no control over
their use, the Company specifically excludes all conditions or
warranties expressed or implied by statute or otherwise as to
dimensions, properties and/or their fitness for any particular
purpose. Any advice given by the Company to any third party
is given for that party’s assistance only and without any
liability on the part of the Company.
Any contract between the Company and a customer will be
subject to the Company’s Conditions of Sale. The extent of
the Company’s liabilities to any customer is clearly set out in
those Conditions; a copy of which is available on request.
Weights
All weights shown in this publication are for guidance
only. They are calculated using nominal dimensions and
scientifically recognised densities. Please note that in
practice, the actual weight can vary significantly from
the theoretical weight due to variations in manufacturing
tolerances and compositions.
Aalco is a registered trade mark of Aalco Metals Limited.
Issue No. 1 – 04/2009
1
Table of Contents
Introduction The Company and Stock Range 2
Section 1 ASTM Pipe 1-1
Section 2 ASTM Tube 2-1
Section 3 Butt Weld Fittings 3-1
Section 4 BSP Fittings 4-1
Section 5 Flanges 5-1
Section 6 Hygienics 6-1
Section 7 Metric Tube & Fittings 7-1
Section 8 General Information 8-1
Stainless Steel Tubular Products
الخبير الاستشاري د.محمد طه
دليل المنتج أنبوب aalco الفولاذ المقاوم للصدأ
المعلومات الواردة هنا تستند إلى حاضرنا
المعرفة والخبرة وتعطى بحسن نية.
ومع ذلك ، لن تتحمل الشركة أي مسؤولية
فيما يتعلق بأي إجراء تم اتخاذه من قبل أي طرف ثالث في
الاعتماد عليها.
حيث يمكن استخدام المنتجات المفصلة هنا على نطاق واسع
أغراض متنوعة وبما أن الشركة ليس لديها سيطرة عليها
استخدامهم ، تستبعد الشركة على وجه التحديد جميع الشروط أو
ضمانات صريحة أو ضمنية بموجب القانون أو بخلاف ذلك
الأبعاد و / أو الخصائص و / أو ملاءمتها لأي شيء معين
غاية. أي نصيحة تقدمها الشركة إلى أي طرف ثالث
يتم تقديمها لمساعدة هذا الطرف فقط وبدون أي
المسؤولية من جانب الشركة.
أي عقد بين الشركة والعميل سيكون
تخضع لشروط البيع الخاصة بالشركة. مدى
التزامات الشركة تجاه أي عميل محددة بوضوح في
تلك الشروط نسخة منها متاحة عند الطلب.
الأوزان
جميع الأوزان الموضحة في هذا المنشور هي للإرشاد
فقط. يتم حسابها باستخدام الأبعاد الاسمية و
كثافات معترف بها علميا. يرجى ملاحظة أنه في
الممارسة ، يمكن أن يختلف الوزن الفعلي بشكل كبير من
الوزن النظري بسبب الاختلافات في التصنيع
التحمل والتركيبات.
Aalco هي علامة تجارية مسجلة لشركة Aalco Metals Limited.
العدد 1 - 04/2009
1
جدول المحتويات
مقدمة الشركة ومجموعة الأسهم 2
القسم 1 ASTM Pipe 1-1
القسم 2 ASTM Tube 2-1
القسم 3 تركيبات اللحام التناكبي 3-1
القسم 4 تركيبات BSP 4-1
القسم 5 الشفاه 5-1
القسم 6 علم الصحة 6-1
القسم 7 الأنبوب المتري والتجهيزات 7-1
القسم 8 معلومات عامة 8-1
منتجات أنبوبي الفولاذ المقاوم للصدأ