bcResonCtrl 1.1
On Sale
£0.00
Pay what you want:
£
A Max For Live device that converts MIDI note on / off messages from an external keyboard or internal MIDI clip into control parameters for Ableton Live's built in Resonators effect.
Instructions
-------------------
1) Place the device on the MIDI track that contains the source of the MIDI you want to use to trigger the effect.
2) Select the specific instance of the Resonators device you want to control using the display's menu.
3) sustain-off works as version 1.0. The number of keys pressed turns on and off the individual resonators.
sustain-on ignores the number of keys pressed, so once an individual resonator is open, it will stay open until the menu is returned to sustain-off.
fully-open immediately turns on all resonators until the menu is returned to sustain-off.
4) Sustain pedal on / off (cc#64) will affect the sustain menu. You can invert the pedal polarity with the button.
Note: Again, the range of Live's Resonators is limited, so notes lower than C-2 and higher than C5 will cause them being output as C-2 and C5 respectively. Given the pitches concerned are fairly extreme under normal circumstances this should not be a problem, however if requested by users, this will be corrected in the next update to them being ignored entirely.
Updated in this version
------------------------------------
1) Added a sustain menu to filter out note off messages.
2) Included external sustain pedal control.
Copyright
----------------
You may use this device freely in your audio production work.
You may use or adapt the contained Max/MSP patch for use in your own patches for personal use only.
Redistribution of any patches containing all or part of this patch is permitted for non-profit purposes only, as long as the original author is credited and the original patch and this file are included each time.
Use of this patch in any form for commercial use or profit is not allowed, without the original author's written permission.
_____________________
www.bugcompass.co.uk
Instructions
-------------------
1) Place the device on the MIDI track that contains the source of the MIDI you want to use to trigger the effect.
2) Select the specific instance of the Resonators device you want to control using the display's menu.
3) sustain-off works as version 1.0. The number of keys pressed turns on and off the individual resonators.
sustain-on ignores the number of keys pressed, so once an individual resonator is open, it will stay open until the menu is returned to sustain-off.
fully-open immediately turns on all resonators until the menu is returned to sustain-off.
4) Sustain pedal on / off (cc#64) will affect the sustain menu. You can invert the pedal polarity with the button.
Note: Again, the range of Live's Resonators is limited, so notes lower than C-2 and higher than C5 will cause them being output as C-2 and C5 respectively. Given the pitches concerned are fairly extreme under normal circumstances this should not be a problem, however if requested by users, this will be corrected in the next update to them being ignored entirely.
Updated in this version
------------------------------------
1) Added a sustain menu to filter out note off messages.
2) Included external sustain pedal control.
Copyright
----------------
You may use this device freely in your audio production work.
You may use or adapt the contained Max/MSP patch for use in your own patches for personal use only.
Redistribution of any patches containing all or part of this patch is permitted for non-profit purposes only, as long as the original author is credited and the original patch and this file are included each time.
Use of this patch in any form for commercial use or profit is not allowed, without the original author's written permission.
_____________________
www.bugcompass.co.uk