LEGO UCS Venator (75367) Stand - 3D Printable files

I've designed a stand for the glorious UCS LEGO Venator (75367), which holds the ship at a 45-degree angle to show more of this cruiser. 

The stand joints are fully LEGO compatible and fit perfectly for the original stand's designated place—no need for disassembly or modification. You can reuse the original technic pins and the 4x4 elements to lock them in place.

Both stands will be assembled from 2 parts which should be assembled with the pins. If the pins are too tight, rescale them a bit against the X/Y axis.

I've attached a .3mf file with the suggested settings but if you use the .stl files, I suggest printing with at least 3 walls and top/bottom layers and using gyroid or cubic infill with 15% at least. Since the rear stand has the greater load 4 layer and walls are advised.