Belle Celle Phone Pouch PDF Sewing Pattern

Thank you for choosing the Belle Celle Phone Pouch!

This is a simple project suitable for beginner bag makers designed to hold a cell phone with a maximum height of 6.5” (16.5cm) with the snap closure fitted, 8” (20cm) without. Belle Celle is approximately 8.25” (21cm) in height, 4.75” (12cm) in width, with an optional exterior zip pocket and three exterior panel options. Belle Celle requires one zipper for the optional pocket, and either two D rings and two lobster/swivel clasps or two rectangle rings, and a triglide for the straps. There is also an option to add a kam/magnetic snap closure to the bag top as per your preference.

Belle Celle can be made in a variety of fabric bases, including woven cotton, canvas and vinyl. A 'hack guide' is also included for modifying the pattern to use clear vinyl.

I recommend interfacing all woven and canvas exterior pieces in full using a lightweight woven interfacing for this project. This project can be made by printing the pattern pieces or just by using the measurements provided.

This pattern comes with a photo tutorial and full instructions. Please note that there is not a video tutorial included with this purchase.

Please note you are purchasing a PDF printable sewing pattern. This is not a finished product.

Supplies List

Fabric measurements are approximate and allow for a slight extra to ease cutting

24” wide by 10” long (61cm wide by 25.5cm long) of Exterior Fabric

24” wide by 10” long (61cm wide by 25.5cm long) of Interior/Lining Fabric

Optional Woven Interfacing as per above (for fabric exterior pieces)

10” wide by 10” long (25.5cm wide by 25.5cm long) of Optional Fusible Foam/Fleece

2 x 0.75” (2cm) Rectangle Rings OR 2 x 0.75” (2cm) D-rings and lobster/swivel clasps

1 x 0.75” (2cm) triglide/slider

6.5” (16.5cm) zipper or 6.5” (16.5cm) zipper tape and one pull (Options 1 and 2 Zip Pocket)

5.5” (14cm) zipper or 5.5” (14cm) zipper tape and one pull (Option 3 Zip Pocket)

Magnetic Snap Closure/Kam Snaps and 2 x 0.75” (2cm) square pieces of interfacing (Optional)

For the strap: (please use your preferred length)

56”-60” (142-152cm) x 4” (10cm) exterior fabric OR 56”-60” (142-152cm) of 1” (2.5cm) webbing