'Tulip' Victorian demi-bust Corset Pattern
On Sale
£12.00
£12.00
This is a modern 18-panel (3 gores per side) over-bust pattern with a beautiful curve to accentuate your waist. Sizes (UK) 10 -20 (US 6 - 16), approx. cup size C. INCLUDES A 25 PAGE DOCUMENT OF CORSET CONSTRUCTION NOTES!
Note – a 2’’ back gap is factored into this pattern. If you would prefer your corset to close at the back, add 1’’ 13mm) to the edge of each panel 9.
The corset length measures 37cm at the centre front and 40cm at the back.
This pattern is drafted in AutoCAD and available as an instant download - you will need to print out on size letter (A) or A4 paper, making sure 'actual size' and 'centre the print' is ticked in your print dialogue box. Outline instructions included for making up single layer corsets.
Measurements in cm (inches)
UK 10 12 14 16 18 20
USA 6 8 10 12 14 16
Continental (Europe) 38 40 42 44 46 48
Bust 86 (34") 91 (36") 97 (38") 102 (40") 107 (42'') 113 (44'')
Under-bust 74 (30") 79 (32") 84 (34") 89 (36") 94 (38'') 99 (40'')
Low rib 74 (29") 79 (31") 84 (33") 89 (35") 94 (37'') 99 (39'')
Waist 67 (27") 74 (29") 79 (31") 84 (33") 89 (35'') 94 (37'') - non cinched measurement (take off 3'' for the waist inched waist measurement)
High hip 81 (32") 86 (34") 91 (36") 99 (38") 102 (40'') 107 (42'')
Full Hip 94 (37") 99 (39") 104 (41") 109 (43") 114 (45'') 119 (47'')
It is recommended that you make a toile to the largest of your measurements to check the fit of the pattern – at this stage you can take in the smaller of your measurements, lengthen if need be, and transfer these amendments to your pattern to ensure a perfect fitting corset.
Please take a look at my website www.corsetsbycaroline.co.uk where I have lots of information about corset making and where it is more cost-effective to buy this design (non EU countries only sorry).
There are no restrictions on the use of this pattern - use to your heart's content. I simply ask that you don't pass on the file or use it to, say, profit from a line of ready-to-wear corsets.
Note – a 2’’ back gap is factored into this pattern. If you would prefer your corset to close at the back, add 1’’ 13mm) to the edge of each panel 9.
The corset length measures 37cm at the centre front and 40cm at the back.
This pattern is drafted in AutoCAD and available as an instant download - you will need to print out on size letter (A) or A4 paper, making sure 'actual size' and 'centre the print' is ticked in your print dialogue box. Outline instructions included for making up single layer corsets.
Measurements in cm (inches)
UK 10 12 14 16 18 20
USA 6 8 10 12 14 16
Continental (Europe) 38 40 42 44 46 48
Bust 86 (34") 91 (36") 97 (38") 102 (40") 107 (42'') 113 (44'')
Under-bust 74 (30") 79 (32") 84 (34") 89 (36") 94 (38'') 99 (40'')
Low rib 74 (29") 79 (31") 84 (33") 89 (35") 94 (37'') 99 (39'')
Waist 67 (27") 74 (29") 79 (31") 84 (33") 89 (35'') 94 (37'') - non cinched measurement (take off 3'' for the waist inched waist measurement)
High hip 81 (32") 86 (34") 91 (36") 99 (38") 102 (40'') 107 (42'')
Full Hip 94 (37") 99 (39") 104 (41") 109 (43") 114 (45'') 119 (47'')
It is recommended that you make a toile to the largest of your measurements to check the fit of the pattern – at this stage you can take in the smaller of your measurements, lengthen if need be, and transfer these amendments to your pattern to ensure a perfect fitting corset.
Please take a look at my website www.corsetsbycaroline.co.uk where I have lots of information about corset making and where it is more cost-effective to buy this design (non EU countries only sorry).
There are no restrictions on the use of this pattern - use to your heart's content. I simply ask that you don't pass on the file or use it to, say, profit from a line of ready-to-wear corsets.
