Ifrit Toy Foam Dart Flycore Blaster

These are the digital .STL files to 3D Print the body of an IFRIT toy foam dart blaster.

The IFRIT is a toy foam dart blaster powered by the Flycore system from OldFusionDesigns. 

In Arabic folklore, the Ifrit is a spirit of smoke often associated with the Djinn. The blaster was designed while waiting for Djinn beta tester feedback, so the name seemed appropriate. The IFRIT can use any straight talon flycore, both n20 or solenoid. It can utilize any flywheels from Worker Nightingale wheels at 19.5mm crush up to Banned Blasters Banshee wheels at a 43mm crush, and everything in between.

FILESETS

The Fileset contains the STL files for the blaster shell and a build guide.

NOTE: This is a FLYCORE blaster. You will need to download, print, assemble, and wire the proper Flycore files from OldFusionDesigns to complete this blaster. Flycore files can be found here: https://github.com/Oldfusiondesigns

Building this blaster requires knowledge of circuits and soldering. It is NOT recommended for beginners.

REQUIRED HARDWARE (NOT including Flycore hardware)

6 Heatset Inserts (same kind as used in the Flycore)

14 M3 x 8mm

1 M3 x 20mm

REQUIRED ELECTRONICS

2 130 sized 3s hobby motors

Flywheels

Neutron Solenoid OR 12v n20 pusher motor (based on Flycore choice)

2 Omron style 15/21 amp microswitches (without levers)

(Optional) 1 Cherry DB2 style 5/10 amp microswitch (with lever) (for N20 Flycore cycle control)

LICENSING - Standard Digital File

Each purchase of these files entitles the buyer to unlimited prints for your personal use OR ONE SOLD SET OF PRINTS OR COMPLETED BLASTER. Additional sales require additional purchases of the files. If you would like to produce these commercially you must contact me to discuss a licensing agreement.