John Deere 00.16, 20.09, 20.09C, 20.11, 20.16, G20.16, G20.09 Front Wheel Drive Axles Workshop Repair Manual PDF (CTM4870) - MJODCTM4870.zip

This is the full workshop service and repair guide covering John Deere 00.16, 20.09, 20.09C, 20.11, 20.16, G20.16 and G20.09 Front Wheel Drive Axles, packed with every technical detail needed to service, troubleshoot, fix and overhaul these units the way a trained technician would.

The workshop service repair manual for John Deere 00.16, 20.09, 20.09C, 20.11, 20.16, G20.16 and G20.09 Front Wheel Drive Axles contains:

* Numbered table of contents easy to use so that you can find the information you need fast.

* Detailed sub-steps expand on repair procedure information

* Numbered instructions guide you through every repair procedure step by step.

* Troubleshooting and electrical service procedures are combined with detailed wiring diagrams for ease of use.

* Notes, cautions and warnings throughout each chapter pinpoint critical information.

* Bold figure number help you quickly match illustrations with instructions.

* Detailed illustrations, drawings and photos guide you through every procedure.

* Enlarged inset helps you identify and examine parts in detail.

ctm4870 - 00.16, 20.09, 20.09C, 20.11, 20.16, G20.16 and G20.09 Front Wheel Drive Axles Component Technical Manual (EN).pdf

ctm8227 - Mosty napędowe na przednie koła00.16, 20.09, 20.09C, 20_11, 20_16, G20_16 i G20_09 Podręcznik techniczny komponentów.pdf

ctm8224 - Predné hnacie nápravy00.16, 20.09, 20.09C, 20.11, 20.16, G20.16 a G20.09 - (európska verzia) Technická príručka komponentov.pdf

ctm8223 - Přední hnací nápravy00.16, 20.09, 20.09C, 20.11, 20.16, G20.16 a G20.09 Technická příručka komponent.pdf

ctm8222 - Forhjulsdrevne aksler 00.16, 20.09, 20.09C, 20.11, 20.16, G20.16 og G20.09.pdf

ctm4877 - MFWD-axlarna00.16, 20.09, 20.09C, 20.11, 20.16, G20.16 och G20.09 Komponent teknisk manual.pdf

ctm4876 - Forhjulstrækaksler 00.16, 20.09, 20.09C, 20.11, 20.16, G20.16 og G20.09 Teknisk manual for komponenter (NOR).pdf

ctm4875 - Etuakselit 00.16, 20.09, 20.09C, 20.11, 20.16, G20.16 ja G20.09 Komponentin tekninen käsikirja.pdf

ctm4874 - Assen voorwielaandrijving 00.16, 20.09, 20.09C, 20.11, 20.16, G20.16 en G20.09 Component Technische Handleiding.pdf

ctm4873 - Manuale tecnico dei componenti degli assi G20.16 e G20.09FWD 00.16, 20.09, 20.09C, 20.11, 20.16.pdf

ctm4871 - Ponts avant 00.16, 20.09, 20.09C, 20.11, 20.16, G20.16 et G20.09 Manuel technique des composants.pdf

ctm4834 - Technisches Komponentenhandbuch für Vorderradantriebsachsen 00.16, 20.09, 20.09C, 20.11, 20.16, G20.16 und G20.09.pdf

ctm8148 - tehnični priročnik za sprednje pogonske osi 00.16, 20.09, 20.09c, 20.11, 20.16, g20.16 in g20.09.pdf

PRODUCT DETAILS:

Total Pages: 324 pages

File Format: PDF (Internal Links, Bookmarked, Table of Contents, Searchable, Printable, high quality)

Language: English etc.

TABLE OF CONTENTS...1

Section 00: Front-Wheel Drive Axles...13

Group 00: Safety Information...13

Recognize Safety Information...19

“Important” - Information...20

“Note” - Information...21

Prevent Machine Runaway...22

Handle Fluids Safely—Avoid Fires...23

Prepare for Emergencies...24

Avoid High-Pressure Fluids...25

Remove Paint Before Welding or Heating...26

Avoid Heating Near Pressurized Fluid Lines...27

Work In Ventilated Area...28

Wear Protective Clothing...29

Practice Safe Maintenance...30

Park Machine Safely...31

Use Proper Lifting Equipment...32

Construct Dealer-Made Tools Safely...33

Support Machine Properly...34

Work in Clean Area...35

Illuminate Work Area Safely...36

Service Machines Safely...37

Use Proper Tools...38

Service Tires Safely...39

Service Front-Wheel Drive Tractor Safely...40

Dispose of Waste Properly...41

Live With Safety...42

Retighten Wheel Nuts...43

Mixing of Lubricants...44

Lubricant Storage...45

Group 01: General Repair Information...13

General Safety and Repair Information...47

Front-Wheel-Drive Axles - Torques for Bolts and Nuts...48

Special tool kit KJD10415 for 00.16 axle model...51

Group 05: Steering Cylinder and Tie Rods...14

Repair Specifications...181

Steering Cylinder and Tie Rods — Exploded View (00.16 Axle)...54

Remove Tie Rods (00.16 Axle)...55

Remove Steering Cylinder (00.16 Axle)...57

Install Steering Cylinder (00.16 Axle)...58

Install Tie Rods (00.16 Axle)...61

Steering Cylinder and Tie Rods — Exploded View (20.11 and 20.16 Axles)...63

Remove Tie Rods (20.11 and 20.16 Axles)...64

Remove Steering Cylinder (20.11 and 20.16 Axles)...66

Install Steering Cylinder (20.11 and 20.16 Axles)...68

Install Tie Rods (20.11 and 20.16 Axles)...70

Steering Cylinder and Tie Rods — Exploded View (20.09 Axle)...72

Steering Cylinder and Tie Rods - Exploded View (G20.09 and G20.16 Axles)...74

Remove Tie Rods (20.09, G20.09 and G20.16 Axles)...77

Remove Steering Cylinder (20.09, G20.09 and G20.16 Axles)...79

Install Steering Cylinder (20.09, G20.09 and G20.16 Axles)...82

Install Tie Rods (20.09, G20.09 and G20.16 Axles)...85

Checking and Adjusting Tread (Basic Adjustment)...88

Checking and Adjusting Steering Angle...91

Checking and Adjusting Steering Angle (G20.09 and G20.16 Axles)...92

Group 10: Planetary Drive and Wheel Hub...14

Special Tools...254

Repair Specifications...181

Planetary Drive - Exploded View (00.16, 20.09, 20.11, 20.16, G20.16 and G20.09 Axles)...99

Remove Planetary Drive (00.16, 20.09, 20.11, 20.16, G20.16 and G20.09 Axles)...102

Install Planetary Drive (00.16, 20.09, 20.11, 20.16, G20.16 and G20.09 Axles)...107

Planetary Drive and Wheel Hub — Exploded View (20.09C Axle)...112

Remove Planetary Drive and Wheel Hub (20.09C Axle)...113

Install Planetary Drive and Wheel Hub (20.09C Axle)...116

Planetary Drive - Fill With Oil...120

Wheel Hub — Exploded View (00.16, 20.09, 20.11, 20.16, G20.16 and G20.09 Axles)...121

Remove Wheel Hub (00.16, 20.09, 20.11, 20.16, G20.16 and G20.09 Axles)...122

Repair Wheel Hub (00.16, 20.09, 20.11, 20.16, G20.16 and G20.09 Axles)...123

Install Wheel Hub (00.16, 20.09, 20.11, 20.16, G20.16 and G20.09 Axles)...126

Group 15: Knuckle Housing and Drive Shafts...15

Special Tools...254

Specifications...137

Knuckle Housing and Drive Shaft — Exploded View (00.16, 20.09, 20.11 and 20.16 Axles)...138

Knuckle Housing and Drive Shaft - Exploded View (G20.09, 20.16 Applies to newer versions. and G20.16 Axles)...15

Remove Knuckle Housing (00.16, 20.09, 20.11, 20.16, G20.16 and G20.09 Axles)...141

Repair Knuckle Housing and King Pin (00.16, 20.09, 20.11 and 20.16 Axles)...143

Repair Knuckle Housing and King Pin (G20.09, 20.16 Applies to newer versions. and G20.16 Axles)...15

Install Knuckle Housing (00.16, 20.09, 20.11, 20.16, G20.16 and G20.09 Axles)...151

Remove Drive Shaft (00.16, 20.09, 20.11, 20.16, G20.16 and G20.09 Axles)...153

Install Drive Shaft (00.16, 20.09, 20.11, 20.16, G20.16 and G20.09 Axles)...155

Knuckle Housing and Drive Shaft — Exploded View (20.09C Axle)...158

Remove Knuckle Housing (20.09C Axle)...160

Repair Knuckle Housing and King Pin (20.09C Axle)...162

Install Knuckle Housing (20.09C Axle)...165

Remove Drive Shafts (20.09C Axle)...167

Install Drive Shafts (20.09C Axle)...169

Group 20: Axle Housing and Differential...15

Special Tools...254

Repair Specifications...181

Axle Housing and Differential Carrier - Exploded View (00.16, G20.16 and G20.09 Axles)...183

Axle Housing and Differential Carrier — Exploded View (20.09, 20.09C, 20.11 and 20.16 Axles)...185

Pinion Shaft — Exploded View (00.16 Axle)...186

Pinion Shaft — Exploded View (20.09, 20.09C, 20.11 and 20.16 Axles)...187

Pinion Shaft - Exploded View (G20.09 and G20.16 Axles)...188

Remove Pinion Shaft (00.16, G20.16 and G20.09 Axles)...190

Install and Adjust Pinion Shaft (00.16, G20.16 and G20.09 Axles)...192

Remove Pinion Shaft (20.09, 20.09C, 20.11 and 20.16 Axles)...199

Install and Adjust Pinion Shaft (20.09, 20.09C, 20.11 and 20.16 Axles)...201

Differential - Exploded View (G20.09 Axle)...208

Remove Differential (00.16, G20.16 and G20.09 Axles)...209

Repair Differential (00.16 Axle)...212

Repair Differential (G20.09 and G20.16 Axles)...218

Install Differential (00.16, G20.16 and G20.09 Axles)...225

Remove Differential (20.09, 20.09C, 20.11 and 20.16 Axles)...235

Repair Differential (20.09, 20.09C, 20.11 and 20.16 Axles)...238

Install Differential (20.09, 20.09C, 20.11 and 20.16 axles)...242

Axle Housing — Fill With Oil...250

Group 25: Axle Suspension...16

Special Tools...254

Axle Suspension — Exploded View (00.16 Axle)...257

Remove Axle Suspension (00.16 Axle)...258

Install Axle Suspension (00.16 Axle)...263

Axle Suspension — Exploded View (20.11 and 20.16 Axles)...269

Remove Axle Suspension (20.11 and 20.16 Axles)...270

Install Axle Suspension (20.11 and 20.16 Axles)...273

Axle Suspension — Exploded View (20.09 Axle)...276

Remove Axle Suspension (20.09 Axle)...277

Install Axle Suspension (20.09 Axle)...278

Axle Suspension - Exploded View (G20.09 and G20.16 Axle)...279

Remove Axle Suspension (G20.09 and G20.16 Axles)...280

Install Axle Suspension (G20.09 and G20.16 Axles)...282

Axle Suspension - Exploded View (G20.16 For submodels CA635497 and CA635198 Axle)...16

Remove Axle Suspension (G20.16 For submodels CA635497 and CA635198 Axle)...16

Install Axle Suspension (G20.16 For submodels CA635497 and CA635198 Axle)...16

Group 200: Description and Theory of Operation...16

Front Wheel Drive Axles — Summary of References...295

Description of Front Wheel Drive...296

Layout of Front Axle...297

Operation of Differential...299

Operation of Self-Locking Differential...302

Operation of Planetary Drive...303

Positive Front Wheel Lead Check...304

Operational Check of Front Wheel Drive Axle...305

Group 212: Observable Symptoms...17

Noises when Driving with Front-Wheel Drive Engaged...17

Unusual Vibrations when Driving with Front-Wheel Drive Engaged...17

John Deere 00.16, 20.09, 20.09C, 20.11, 20.16, G20.16 and G20.09 Front Wheel Drive Axles Technical Service Manual (CTM4870)