Entryway Shoe Bench Plans PDF 36 Inch Mudroom Bench with Shoe Shelf Woodworking Plan for Beginners Printable Instant Download

A bench you sit on to put your boots on, with a shelf underneath for the shoes. Finished size 36" wide x 14" deep, seat height 17¼" — slightly lower than a dining chair, which is exactly what you want when you are pulling a heel up onto your knee. The shelf holds six to eight pairs and leaves 6" of clear boot room beneath it.

WHAT YOU GET

- 10 page PDF, US Letter, instant download

- Cut list with lettered parts A to G, 16 cuts, 64 screws

- Cutting diagram for three 2x4s and two 1x8s with offcuts labelled

- Dimensioned front and side elevations plus a plan view with the top removed

- Step by step assembly with corner detail drawings and a screw schedule

- Height reference table, finishing notes and FAQ

WHAT YOU NEED

- 3 x 2x4 at 8 ft and 2 x 1x8 at 8 ft (pine is fine, poplar if you are painting)

- About 64 x 2½" screws

- Tape measure, pencil, square, drill/driver, any saw that crosscuts straight

The smallest and cheapest build in the range. No angles, no joinery, nothing over 36" long.

IMPORTANT

- This is a digital download. Nothing is shipped to you.

- Print at 100%, do not use "fit to page".

- All dimensions are in inches and use standard North American lumber sizes.

TERMS OF USE

For your own personal use. You may print as many copies as you like and you may sell what you build from these plans. You may not resell, share or redistribute the PDF file itself.