Mitsubishi Grandis 2004-2008 Workshop Repair Service Manual PDF with Electrical Wiring Diagrams - MMTBSGRDOMES.zip

A full service and repair guide, complete with electrical wiring diagrams, for the Mitsubishi Grandis covering model years 2004 through 2008 — containing every technical detail needed to service, troubleshoot, fix, and rebuild the vehicle to professional mechanic standards.

The Mitsubishi Grandis 2004-2008 workshop service repair manual contains:

* Numbered table of contents easy to use so that you can find the information you need fast.

* Detailed sub-steps expand on repair procedure information

* Numbered instructions guide you through every repair procedure step by step.

* Troubleshooting and electrical service procedures are combined with detailed wiring diagrams for ease of use.

* Notes, cautions and warnings throughout each chapter pinpoint critical information.

* Bold figure number help you quickly match illustrations with instructions.

* Detailed illustrations, drawings and photos guide you through every procedure.

* Enlarged inset helps you identify and examine parts in detail.

'04-

Body Repair Manual

Workshop Manual & Electrical Wiring Diagrams

-'06

CXPE06E1.iso

-'08

CXPE08E1.iso

PRODUCT DETAILS:

Total Pages: 4,021 pages

File Format: PDF / DVD iso image

Language: English

TABLE OF CONTENTS

GR00000100-54B...1

SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR...1

GENERAL INFORMATION...5

BUZZER...6

CENTRAL DOOR LOCKING SYSTEM...9

KEYLESS ENTRY SYSTEM...9

POWER WINDOW...11

SUNROOF...11

WINDSHIELD WIPER AND WASHER...12

REAR WIPER AND WASHER...14

HEADLAMP WASHER...16

ELECTRIC RETRACTABLE REMOTE CONTROLLED MIRROR...17

HEADLAMP...18

FLASHER TIMER FUNCTION...19

FOG LAMP...20

INTERIOR LAMP...21

SPECIAL TOOLS...25

TROUBLESHOOTING...27

PRIOR TO TROUBLESHOOTING...27

STANDARD FLOW OF DIAGNOSTIC TROUBLESHOOTING...27

DIAGNOSTIC FUNCTION...27

HOW TO READ DIAGNOSIS CODE...27

HOW TO CHECK INPUT SIGNALS...27

DIAGNOSIS CODE CHART...29

DIAGNOSTIC TROUBLE CODE PROCEDURES...30

Diagnosis code No.01 Trouble in SWS communication line system or ETACS-ECU...30

DIAGNOSIS PROCEDURE...31

Step 1. MUT-III CAN bus diagnostics...31

Step 2. Check whether the diagnosis code is reset...31

Diagnosis code No.02 Communication error with column switch...32

DIAGNOSIS PROCEDURE...33

Step 1. MUT-III CAN bus diagnostics...33

Step 2. Use the MUT-III to confirm a diagnosis code. (MUT-III diagnosis code)...34

Step 3. Connector check: C-301 column switch connector...34

Step 4. Voltage measurement at C-301 column switch connector...34

Step 5. Check the wiring harness between C-301 column switch connector terminal No.1 and the fusi...35

Step 6. Resistance measurement at the C-301 column switch connector...36

Step 7. Check the wiring harness between C-301 column switch connector terminal No.4 and the body...36

Step 8. Connector check: C-221 ETACS-ECU connector...37

Step 9. Check the wiring harness from C-221 ETACS-ECU connector terminal Nos.59 and 68 to C-301 c...38

Step 10. Check whether the diagnosis code is reset...38

Diagnosis code No.03 Communication error with front-ECU...39

DIAGNOSIS PROCEDURE...41

Step 1. MUT-III CAN bus diagnostics...41

Step 2. MUT-III diagnosis code...41

Step 3. Connector check: A-14X front-ECU connector...41

Step 4. Voltage measurement at A-14X front-ECU connector...41

Step 5. Check the wiring harness between A-14X front-ECU connector terminal No.7 and the fusible ...41

Step 6. Connector check: A-15X front-ECU connector...42

Step 7. Resistance measurement at A-15X front-ECU connector...42

Step 8. Connector check: A-25 earth connector...42

Step 9. Check the wiring harness between A-15X front-ECU connector terminal No.31 and the A-25 ea...43

Step 10. Connector check: C-221 ETACS-ECU connector...43

Step 11. Check the wiring harness between C-221 ETACS-ECU connector terminal No.59 and A-15X fron...44

Step 12. Check whether the diagnosis code is reset...45

Diagnosis code No.04 Communication error with sunroof-ECU...46

DIAGNOSIS PROCEDURE...48

Step 1. MUT-III CAN bus diagnostics...48

Step 2.Check whether the diagnosis code is reset...48

Step 3. Connector check: E-07 sunroof motor assembly connector...48

Step 4. Voltage measurement at E-07 sunroof motor assembly connector...48

Step 5. Check the wiring harness between E-07 sunroof motor assembly connector terminal No.1 and ...50

Step 6. Voltage measurement at E-07 sunroof motor assembly connector...51

Step 7. Check the wiring harness between E-07 sunroof motor assembly connector terminal No.2 and ...51

Step 8. Resistance measurement at E-07 sunroof motor assembly connector...52

Step 9. Check the wiring harness between E-07 sunroof motor assembly connector terminal No.5 and ...52

Step 10. Connector check: C-221 ETACS-ECU connector...53

Step 11. Check the wiring harness between E-07 sunroof motor assembly connector terminal No.10 an...54

Step 12. Check whether the diagnosis code is reset...55

Diagnosis code No.05 Communication error with power window main switch...56

DIAGNOSIS PROCEDURE...58

Step 1. MUT-III CAN bus diagnostics...58

Step 2. Check whether the diagnosis code is reset...58

Step 3. Pulse check...58

Step 4. Connector check: F-05 power window main switch connector...58

Step 5. Voltage measurement at the F-05 power window main switch connector...58

Step 6. Connector check: C-217 power window relay connector...59

Step 7. Check the power window relay...59

Step 8. Voltage measurement at C-217 power window relay connector...59

Step 9. Check the wiring harness between C-217 power window relay connector terminal No.5 and fus...60

Step 10. Resistance measurement at C-217 power window relay connector...61

Step 11. Check the wiring harness between C-217 power window relay connector terminal No.3 and bo...61

Step 12. Connector check: C-219 ETACS-ECU connector...62

Step 13. Check the wiring harness between C-217 power window relay connector terminal No.4 and F-...63

Step 14. Resistance measurement at the F-05 power window main switch connector...64

Step 15. Check the wiring harness between F-05 power window main switch connector terminal No.2 a...64

Step 16. Connector check: C-221 ETACS-ECU connector...65

Step 17. Check the wiring harness between C-221 ETACS-ECU connector terminal No.59 and F-05 power...66

Step 18. Check whether the diagnosis code is reset...67

Diagnosis code No.10 Bus off...67

DIAGNOSIS PROCEDURE...67

Step 1. MUT-III CAN bus diagnostics...67

Step 2. Check whether the diagnosis code is reset...67

Step 3. Check whether the diagnosis code is reset...67

Diagnosis code No.11 Engine-A/T-ECU time-out (related to engine)...68

DIAGNOSTIC PROCEDURE...68

Step 1. MUT-III CAN bus diagnostics...68

Step 2. Check for engine control diagnosis code...68

Step 3. MUT-III diagnosis code...68

Step 4. Check whether the diagnosis code is reset...68

Step 5. Check whether the diagnosis code is reset...69

Step 6. Check whether the diagnosis code is reset...69

Diagnosis code No.12 Engine-A/T-ECU time-out (related to A/T)...69

DIAGNOSTIC PROCEDURE...69

Step 1. MUT-III CAN bus diagnostics...69

Step 2. Check for A/T control-related diagnosis code...70

Step 3. MUT-III diagnosis code...70

Step 4. Check whether the diagnosis code is reset...70

Step 5. Check whether the diagnosis code is reset...70

Step 6. Check whether the diagnosis code is reset...70

Diagnosis code No.13 A/C-ECU time-out...70

DIAGNOSIS PROCEDURE...71

Step 1. MUT-III CAN bus diagnostics...71

Step 2. MUT-III diagnosis code...71

Step 3. Check whether the diagnosis code is reset...71

Step 4. Check whether the diagnosis code is reset...71

Step 5. Check whether the diagnosis code is reset...71

Diagnosis code No.14 Meter time-out...72

DIAGNOSIS PROCEDURE...72

Step 1. MUT-III CAN bus diagnostics...72

Step 2. MUT-III diagnosis code...72

Step 3. MUT-III diagnosis code...72

Step 4. Check whether the diagnosis code is reset...72

Step 5. Check whether the diagnosis code is reset...73

Step 6. Check whether the diagnosis code is reset...73

Diagnosis code No.21 Meter failure information...73

DIAGNOSIS PROCEDURE...73

Step 1. MUT-III CAN bus diagnostics...73

Step 2. MUT-III diagnosis code...73

Step 3. MUT-III diagnosis code...74

Step 4. Check whether the diagnosis code is reset...74

Step 5. Check whether the diagnosis code is reset...74

Step 6. Check whether the diagnosis code is reset...74

TROUBLE SYMPTOM CHART...74

CHECK TROUBLE BY USING THE INPUT SIGNAL CHECK...79

PULSE CHECK...79

OPERATION AND FUNCTION QUICK-REFERENCE TABLE FOR INPUT SIGNAL INSPECTION PROCEDURES...81

SYMPTOM PROCEDURES...83

Inspection Procedure A-1: Communication with the MUT-III is not possible...83

DIAGNOSTIC PROCEDURE...84

Step 1. Check that the MUT-III communicates with the other systems...84

Step 2. Check that the MUT-III can communicate with the system...84

Step 3. Connector check: C-221 ETACS-ECU connector...85

Step 4. Resistance measurement at the C-221 ETACS-ECU connector...85

Step 5. Check the wiring harness between C-221 ETACS-ECU connector terminal No.56 and body earth...85

Step 6. Connector check: C-126 diagnosis connector...86

Step 7. Check the wiring harness from C-221 ETACS-ECU connector terminal Nos.51 and 67 to C-126 d...86

Step 8. Retest the system...87

Inspection Procedure A-2: When the ignition switch is at the LOCK (OFF) position, the functions d...87

DIAGNOSTIC PROCEDURE...89

Step 1. Connector check: C-219 ETACS-ECU connector...89

Step 2. Voltage measurement at the C-219 ETACS-ECU connector...89

Step 3. Check the wiring harness between C-219 ETACS-ECU connector terminal No.20 and fusible lin...90

Step 4. Resistance measurement at the C-219 ETACS-ECU connector...91

Step 5. Check the wiring harness between C-219 ETACS-ECU connector terminal No.3 and body earth...91

Step 6. Retest the system...92

TONE ALARM...92

Inspection Procedure B-1: Lamp reminder buzzer function does not work normally...92

DIAGNOSTIC PROCEDURE...92

Step 1. Check the power supply circuit...92

Step 2. Pulse check...93

Step 3. Retest the system...93

INSPECTION PROCEDURE B-2: Seat belt warning buzzer function does not work normally...94

DIAGNOSTIC PROCEDURE...94

Step 1. MUT-III diagnosis code...94

Step 2. Check the seat belt switch, where the seat belt warning buzzer does not function normally...94

Step 3. Pulse check...94

Step 4. Pulse check...95

Step 5. Pulse check...95

Step 6. Retest the system...95

Inspection Procedure B-3: Door-ajar warning buzzer function does not work normally...95

DIAGNOSTIC PROCEDURE...96

Step 1. Check the power supply circuit...96

Step 2. Pulse check...96

Step 3. Customize function by using the SWS monitor...97

Step 4. Retest the system...97

Inspection Procedure B-4: Turn-signal lamp operation sound function does not work normally...97

DIAGNOSTIC PROCEDURE...98

Step 1. Check that the turn-signal lamps operate...98

Step 2. Pulse check...98

Step 3. Customize function by using the SWS monitor...98

Step 4. Retest the system...98

CENTRAL DOOR LOCKING SYSTEM...99

Inspection Procedure C-1: central door locking system does not work...99

DIAGNOSIS PROCEDURE...99

Step 1. Check that the central door locking system functions by using the front passenger's key c...99

Step 2. Check the power supply circuit...100

Step 3. Connector check: C-219 ETACS-ECU connector...100

Step 4. Check the wiring harness between C-219 ETACS-ECU connector terminal No.2 and fusible link...101

Step 5. Retest the system...102

Inspection Procedure C-2: The central door locking system does not function by using the driver's...102

DIAGNOSIS PROCEDURE...103

Step 1. Pulse check...103

Step 2. Retest the system...103

Inspection Procedure C-3: The central door locking system does not function by using the passenge...103

DIAGNOSIS PROCEDURE...104

Step 1. Pulse check...104

Step 2. Retest the system...104

Inspection Procedure C-4: The central door locking system does not function by using the tailgate...105

DIAGNOSIS PROCEDURE...105

Step 1. Pulse check...105

Step 2. Retest the system...106

Inspection Procedure C-5: A door can not be locked or unlocked by the central door locking system...107

DIAGNOSIS PROCEDURE...108

Step 1. Confirm which door lock actuator is defective...108

Step 2. Connector check: F-04 door lock actuator (front: LH) connector...108

Step 3. Check the door lock actuator (front: LH)...108

Step 4. Connector check: C-219, C-220 ETACS-ECU connector...108

Step 5. Check the wiring harness from C-219 ETACS-ECU connector terminal No.12 and C-220 ETACS-EC...109

Step 6. Connector check: F-17 door lock actuator (front: RH) connector...109

Step 7. Check the door lock actuator (front: RH)...109

Step 8. Connector check: C-219 ETACS-ECU connector...110

Step 9. Check the wiring harness from C-219 ETACS-ECU connector terminal Nos.12 and 13 to F-17 do...110

Step 10. Connector check: F-20 door lock actuator (rear: RH) connector...111

Step 11. Check the door lock actuator (rear: RH)...111

Step 12. Connector check: C-219 ETACS-ECU connector...111

Step 13. Check the wiring harness from C-219 ETACS-ECU connector terminal Nos.12 and 13 to F-20 d...111

Step 14. Connector check: F-08 door lock actuator (rear: LH) connector...112

Step 15. Check the door lock actuator (rear: LH)...112

Step 16. Connector check: C-219 ETACS-ECU connector...112

Step 17. Check the wiring harness from C-219 ETACS-ECU connector terminal Nos.12 and 13 to F-08 d...112

Inspection Procedure C-5: A door can not be locked or unlocked by the central door locking system...114

DIAGNOSIS PROCEDURE...115

Step 1. Confirm which door lock actuator is defective...115

Step 2. Connector check: F-17 door lock actuator (front: RH) connector...115

Step 3. Check the door lock actuator (front: RH)...115

Step 4. Connector check: C-219, C-220 ETACS-ECU connector...115

Step 5. Check the wiring harness from C-219 ETACS-ECU connector terminal No.12 and C-220 ETACS-EC...116

Step 6. Connector check: F-04 door lock actuator (front: LH) connector...116

Step 7. Check the door lock actuator (front: LH)...116

Step 8. Connector check: C-219 ETACS-ECU connector...117

Step 9. Check the wiring harness from C-219 ETACS-ECU connector terminal Nos.12 and 13 to F-04 do...117

Step 10. Connector check: F-20 door lock actuator (rear: RH) connector...118

Step 11. Check the door lock actuator (rear: RH)...118

Step 12. Connector check: C-219 ETACS-ECU connector...118

Step 13. Check the wiring harness from C-219 ETACS-ECU connector terminal Nos.12 and 13 to F-20 d...118

Step 14. Connector check: F-08 door lock actuator (rear: LH) connector...119

Step 15. Check the door lock actuator (rear: LH)...119

Step 16. Connector check: C-219 ETACS-ECU connector...119

Step 17. Check the wiring harness from C-219 ETACS-ECU connector terminal Nos.12 and 13 to F-08 d...119

Inspection Procedure C-6: The tailgate cannot be opened or closed...120

DIAGNOSIS PROCEDURE...120

Step 1. Check that the central door locking system and the keyless entry system operate...120

Step 2. Pulse check...121

Step 3. Connector check: G-17 tailgate lock actuator connector...121

Step 4. Check the tailgate lock actuator...121

Step 5. Resistance measurement at the G-17 tailgate lock actuator connector...121

Step 6. Check the wiring harness between G-17 tailgate lock actuator connector terminal No.2 and ...122

Step 7. Connector check: C-221 ETACS-ECU connector...122

Step 8. Check the wiring harness from C-221 ETACS-ECU connector terminal No.61 to G-17 tailgate l...123

Step 9. Retest the system...123

POWER WINDOWS...124

Inspection Procedure D-1: Power windows do not work at all...124

DIAGNOSIS PROCEDURE...125

Step 1. Pulse check...125

Step 2. Connector check: F-05 power window main switch connector...125

Step 3. Voltage measurement at the F-05 power window main switch connector...125

Step 4. Connector check: C-217 power window relay connector...126

Step 5. Check the power window relay...126

Step 6. Voltage measurement at C-217 power window relay connector...126

Step 7. Check the wiring harness between C-217 power window relay connector terminal No.5 and fus...127

Step 8. Resistance measurement at C-217 power window relay connector...128

Step 9. Check the wiring harness between C-217 power window relay connector terminal No.3 and bod...128

Step 10. Connector check: C-219 ETACS-ECU connector...129

Step 11. Check the wiring harness between C-217 power window relay connector terminal No.4 and F-...130

Step 12. Resistance measurement at the F-05 power window main switch connector...131

Step 13. Check the wiring harness between F-05 power window main switch connector terminal No.2 a...131

Step 14. Connector check: C-221 ETACS-ECU connector...132

Step 15. Check the wiring harness between C-221 ETACS-ECU connector terminal No.59 and F-05 power...133

Step 16. Retest the system...134

Inspection Procedure D-2: Driver's power window does not work by means of the power window main s...134

DIAGNOSIS PROCEDURE...135

Step 1. Check the power window main switch...135

Step 2. Connector check: F-05 power window main switch connector and F-10 power window motor (fro...135

Step 3. Check the wiring harness from F-10 power window motor (front: LH) connector terminal Nos...135

Step 4. Retest the system...135

Inspection Procedure D-2: Driver's power window does not work by means of the power window main s...136

DIAGNOSIS PROCEDURE...137