Under Desk Cable Management STL Set – Modular Cable Tray, Power Strip Holder, Cable Clips, Headphone Hook, No Supports

Get the cable spaghetti off the floor with fifteen print-ready STL files. The cable tray comes in 100, 140 and 180 mm lengths, so every piece fits a 200 mm bed, and dovetails link as many trays as your desk needs. Each tray hangs from two countersunk 4 mm wood screws and leaves a 25 mm gap under the desk for cables. There are also power-strip holders in three widths, snap-in cable clips for 5–18 mm cables (adhesive pad or screw) and a headphone hook.

Every part prints flat without supports. We checked every file: watertight single bodies, no overhang steeper than 45°, load-bearing walls at least 2.4 mm (the tray back wall is 3 mm), and a 0.25 mm dovetail clearance measured on the exported meshes. You also get the parametric Python source, so you can change sizes and clearances yourself.

Made with AI assistance (designed and generated by code). Not test-printed yet, so print one clip and a tray end first. Licence: print and sell the parts, but do not resell or share the files.

Nothing in this pack has been test-printed yet. Print one clip and a tray end first.

How it was made: designed and generated by code that Lilambd Crossing wrote with an AI assistant (Claude); the files come out of that code, not out of an image generator.

Missing something? Tell us in one line what you'd gladly pay for, if someone made it — one-line form: https://docs.google.com/forms/d/1tzMQtHsEbMg7JyMk7YGqslHijfNTciByi8wrwjQpUPY/viewform (or email submissions@lilambd.com, subject "Data wish"). If enough people ask, we build it, and you get it free.

Used this? Tell us what you used it for, what was missing, and what you used before: https://docs.google.com/forms/d/1tzMQtHsEbMg7JyMk7YGqslHijfNTciByi8wrwjQpUPY/viewform (one minute, no email asked).

Need a specific file or dataset made? Ask here (no promise, quick form): https://docs.google.com/forms/d/e/1FAIpQLSf6V7YALfwE42SaF1re_cLzAoP96TpRg61jE3Nf7UTWEtWRxA/viewform