Board Game Organiser STL - Parametric Stackable Insert System - Card Trays, Token Bins, Snap Lid Box, Dice Tray - No Supports

Tame the chaos inside your game box with a modular organiser that works for almost any game. Every piece sits on the same grid (1/4 of the box width), so you can mix card trays, scoop-bottom token bins, snap-lid boxes, a dice tray, player kit trays and a first-player stand, then stack pieces of the same footprint: the foot of each piece drops into the rim below and self-centres. The included STL files fit a 295 x 295 x 70 mm box, with a ready-made example layout that fills it completely.

Card wells fit standard (63 x 88 mm) and mini (41 x 63 mm) cards, sleeved or unsleeved, with push-through slots and finger notches. The snap lid sits below the rim with 0.3 mm clearance, so you can still stack on a closed box. Everything prints flat-side down with no supports, and every file is checked watertight and single-body. For other box sizes, a Python generator builds the whole set from a short JSON file with your box's inside measurements.

You get 15 STL files, the generator and source code, an example layout file, and a verification report. Made with AI assistance (designed and generated by code) by Lilambd Crossing. Licence: print and sell the printed items freely; please do not share or resell the files. Generic design, not affiliated with any game.

Nothing in this pack has been test-printed yet. Print one tray first and check the fit in your box.

How it was made: designed and generated by code that Lilambd Crossing wrote with an AI assistant (Claude); the files come out of that code, not out of an image generator.

Missing something? Tell us in one line what you'd gladly pay for, if someone made it — one-line form: https://docs.google.com/forms/d/1tzMQtHsEbMg7JyMk7YGqslHijfNTciByi8wrwjQpUPY/viewform (or email submissions@lilambd.com, subject "Data wish"). If enough people ask, we build it, and you get it free.

Used this? Tell us what you used it for, what was missing, and what you used before: https://docs.google.com/forms/d/1tzMQtHsEbMg7JyMk7YGqslHijfNTciByi8wrwjQpUPY/viewform (one minute, no email asked).

Need a specific file or dataset made? Ask here (no promise, quick form): https://docs.google.com/forms/d/e/1FAIpQLSf6V7YALfwE42SaF1re_cLzAoP96TpRg61jE3Nf7UTWEtWRxA/viewform