X-Shot Micro Reshell 2 v1.1 - Flintlock Variant - FILES ONLY

This is a GenCo Microwerks shell for the X-Shot Micro, a tiny powerhouse of a blaster. All the hardware you need is already provided by the Micro. You just need to print parts in the colors of your chosing and you're good to go to take a screwdriver to the Micro.

This is the second entry in a new line of reshells that I will occasionally create, all based on the Micro plunger system and hardware.

---

Buying this means that you will get a zip file full of STL files for the blaster.

You can use these files to print the blaster and associated items for personal, non-commercial, non-distribution purposes as often as you like. Tinkering is encouraged. Let me know how that goes.

All parts can be printed on a bed of 180mm edge length. You can print most pieces without supports, except for Shell L and R.

The assembly instructions can be found here -> https://wildwestscifi.net/x-shot-micro-reshell-2-assembly-instructions

---

https://www.youtube.com/watch?v=37nYP7HunIc <- Maritimefoam has a look at the blaster, and provides an assembly video.

https://www.youtube.com/watch?v=SEfCjL7GyI4 <- XFoxGames is having a quick look at the first 3 Reshells.

---

Changelog: 

v1.0

- Initial Release.

v1.1

- Adjusted the angle of the grip scales for a smoother bevel.

- Tightened the screw holes. By default they were a bit too loose when your printer is more accurate. Erring on the side of "too tight" is easier to fix than the opposite.