Maker Bench 01 — 12 Hobby Tool STL Files + Editable Source

A practical set of original hobby-bench designs, supplied as digital files.

Maker Bench 01 contains 12 STL models and 12 matching editable OpenSCAD sources: 8- and 12-well hex bit racks, 3- and 5-groove brush rests, 6- and 10-peg thread-spool racks, 6- and 8-well paint palettes, 6- and 9-aperture circle templates, and 80- and 120-mm layout squares. Dimension notes and a circle-template reference diagram are included.

The cover renders the actual meshes. These are geometry-checked prototype files; they have NOT been sliced or physically test-printed. Fit, strength, liquid retention, measuring accuracy, material compatibility and printability on your printer remain unverified. Review your slicer and make a trial print.

Bit wells are 7.8 mm round holes, not locking holders. Brush grooves are open 8 mm semicircles. Spool pegs are 4.8 mm diameter on 27 x 30 mm centers; measure your spools. Templates and squares are hobby layout aids, not calibrated measuring tools. Palettes are for hobby paint only; no solvent resistance or food-contact use is specified.

Models use millimeters and flat bases. Largest footprints are 143 x 62 mm and 116 x 116 mm; tallest model is 31.9 mm. Suggested settings are starting points, not tested printer profiles.

Digital files only. No physical items, tools, paint, brushes, thread or G-code included. Personal use and personal gifts; selling physical prints and redistributing files are not included.