Angie Corset Bodice (strapped) Pattern
On Sale
£10.00
£10.00
This is a modern 12-panel under-bust corset bodice pattern with optional torso lengths (short and long waisted). It has a beautiful curve to accentuate your waist - a 4'' reduction on standard sizes. Sizes (UK) 10 -20 (US 6 - 16).
Note – a 2’’ lacing gap is factored into this pattern. If you would prefer your corset to close at the back, add 1’’ (12.2mm) to the edge of each panel 6. INCLUDES A 25 PAGE DOCUMENT OF CORSET CONSTRUCTION NOTES!
The corset length measures 37.5cm or 32.5 at the centre front (long or short waisted respectively) and 55.5cm or 50.5cm at the back.
This pattern is drafted in AutoCAD and available as an instant download - you will need to print out on size letter (A) or A4 paper, making sure 'actual size' and 'centre the print' is ticked in your print dialogue box. Outline instructions included for making up single layer corsets.
Measurements in cm (inches)
UK 10 12 14 16 18 20
USA 6 8 10 12 14 16
Continental (Europe) 38 40 42 44 46 48
Bust 86 (34") 91 (36") 97 (38") 102 (40") 107 (42'') 114 (44'')
Under-bust 79 (31") 84 (33") 89 (35") 94 (37") 99 (39'') 102 (41'')
Waist 67 (27'') 74 (29") 79 (31") 84 (33") 89 (35'') 94 (37'') - non cinched measurement - take off 4'' for the actual waist measurement
High hip 81 (32") 86 (34") 91 (36") 97 (39") 102 (41'') 109 (43'')
Full Hip 91 (36") 97 (38") 102 (40") 107 (42") 112 (44'') 117 (46'')
It is recommended that you make a toile to the largest of your measurements to check the fit of the pattern – at this stage you can take in the smaller of your measurements, lengthen if need be, and transfer these amendments to your pattern to ensure a perfect fitting corset!
This pattern forms one of the four patterns featured in my Corset Classics III collection.
Please take a look at my website www.corsetsbycaroline.co.uk where I have lots of information about corset making and where it is more cost-effective to buy this design (non EU countries only sorry).
There are no restrictions on the use of this pattern - use to your heart's content. I simply ask that you don't pass on the file or use it to, say, profit from a line of ready-to-wear corsets.
Note – a 2’’ lacing gap is factored into this pattern. If you would prefer your corset to close at the back, add 1’’ (12.2mm) to the edge of each panel 6. INCLUDES A 25 PAGE DOCUMENT OF CORSET CONSTRUCTION NOTES!
The corset length measures 37.5cm or 32.5 at the centre front (long or short waisted respectively) and 55.5cm or 50.5cm at the back.
This pattern is drafted in AutoCAD and available as an instant download - you will need to print out on size letter (A) or A4 paper, making sure 'actual size' and 'centre the print' is ticked in your print dialogue box. Outline instructions included for making up single layer corsets.
Measurements in cm (inches)
UK 10 12 14 16 18 20
USA 6 8 10 12 14 16
Continental (Europe) 38 40 42 44 46 48
Bust 86 (34") 91 (36") 97 (38") 102 (40") 107 (42'') 114 (44'')
Under-bust 79 (31") 84 (33") 89 (35") 94 (37") 99 (39'') 102 (41'')
Waist 67 (27'') 74 (29") 79 (31") 84 (33") 89 (35'') 94 (37'') - non cinched measurement - take off 4'' for the actual waist measurement
High hip 81 (32") 86 (34") 91 (36") 97 (39") 102 (41'') 109 (43'')
Full Hip 91 (36") 97 (38") 102 (40") 107 (42") 112 (44'') 117 (46'')
It is recommended that you make a toile to the largest of your measurements to check the fit of the pattern – at this stage you can take in the smaller of your measurements, lengthen if need be, and transfer these amendments to your pattern to ensure a perfect fitting corset!
This pattern forms one of the four patterns featured in my Corset Classics III collection.
Please take a look at my website www.corsetsbycaroline.co.uk where I have lots of information about corset making and where it is more cost-effective to buy this design (non EU countries only sorry).
There are no restrictions on the use of this pattern - use to your heart's content. I simply ask that you don't pass on the file or use it to, say, profit from a line of ready-to-wear corsets.
