Maple Leaf Holiday Dinner Table Place Card Frame Holder For 2 1/2 x 2 1/8" photo
On Sale
$4.00
$3.20
Maple Leaf Holiday Dinner Table Place Card Frame Holder For 2 1/2 x 2 1/8" photo
This paper card stock printable, with my hand painted then digitally enhanced roasted turkey art for 4 of the 6 parts, all on one sheet, is perfect for the autumn and winter holiday dinner parties, as table place card holders! You can even turn them into hanging ornaments by threading ribbon through the hole on panels 3 & 4!
The maple leaf is a digital scan of my real life silk dupioni covered illustration board (I now use mat board), fabric covered photo frame! I hand painted the veins and stem onto it.
You get 4 main maple leaf shape panels to cut out, including the 2" x 1 5/8" oval centered on panels 1 & 2, for a photo, or use the insert printable, and write your guest's name on it! Panels 2 & 3 connect with 1/8" by 1 foot long ribbon, thread through the 5 holes in a half circle direction, thread both directions, and know, to make the photo pocket. Panel 4 is the easel back, with the maple leaf scan design on it, too, and that is where the bendable strut leg connects, glue on the top part, connect the bottom of the 2 sided strut leg to the easel back with ribbon, between the layers, at the bottom.
You can cut a piece of acid free / photo safe sheet protector page for the protective photo sleeve, with the dark brown oval with 5 circles to hole punch (don't hole punch the oval unless you have a die cut for the oval, and only punch panels 1 & 2), provided to use as a guide, and also use the sheet protector page, and cut a piece that same size as the 4 sided strut leg, before cutting away the spacer piece between the 2 lines provided. After you cut the clear strut leg piece, the separate the top & bottom of the strut leg, and placing the clear strut leg piece between the top & bottom strut leg pieces, on both sides, using the spacer for spacing the top & bottom.
And that's it! You can decoupage the panels before connecting and gluing. I'd use an acid free glue stick or that tape that pulls out that lays a thin layer, on the back side of the panels then press panels together. You can use hot glue and glue sticks, but be careful not to over glue.
Then personalize the table card frame to your heart's content!
letter size pdf download sheet
I have other table place card frames for 2x3" photos / inserts, with my designs, that can also be printed onto washable inkjet printer fabric, backed with Therm o Web HeatnBond interfacing, for re-usable table card frame ornaments.
I also have turkey, blueberry & pumpkin pie, and pumpkin carriage shaped, table card frame ornaments in my store!
Thank you!
Kristie Hubler
Maple leaf Thanksgiving holiday table place card holder photo frame ornament design, printable, pattern, & download copyright protected by Kristie Hubler / fabricatedframes.com at fabricatedframescom@gmail.com
This paper card stock printable, with my hand painted then digitally enhanced roasted turkey art for 4 of the 6 parts, all on one sheet, is perfect for the autumn and winter holiday dinner parties, as table place card holders! You can even turn them into hanging ornaments by threading ribbon through the hole on panels 3 & 4!
The maple leaf is a digital scan of my real life silk dupioni covered illustration board (I now use mat board), fabric covered photo frame! I hand painted the veins and stem onto it.
You get 4 main maple leaf shape panels to cut out, including the 2" x 1 5/8" oval centered on panels 1 & 2, for a photo, or use the insert printable, and write your guest's name on it! Panels 2 & 3 connect with 1/8" by 1 foot long ribbon, thread through the 5 holes in a half circle direction, thread both directions, and know, to make the photo pocket. Panel 4 is the easel back, with the maple leaf scan design on it, too, and that is where the bendable strut leg connects, glue on the top part, connect the bottom of the 2 sided strut leg to the easel back with ribbon, between the layers, at the bottom.
You can cut a piece of acid free / photo safe sheet protector page for the protective photo sleeve, with the dark brown oval with 5 circles to hole punch (don't hole punch the oval unless you have a die cut for the oval, and only punch panels 1 & 2), provided to use as a guide, and also use the sheet protector page, and cut a piece that same size as the 4 sided strut leg, before cutting away the spacer piece between the 2 lines provided. After you cut the clear strut leg piece, the separate the top & bottom of the strut leg, and placing the clear strut leg piece between the top & bottom strut leg pieces, on both sides, using the spacer for spacing the top & bottom.
And that's it! You can decoupage the panels before connecting and gluing. I'd use an acid free glue stick or that tape that pulls out that lays a thin layer, on the back side of the panels then press panels together. You can use hot glue and glue sticks, but be careful not to over glue.
Then personalize the table card frame to your heart's content!
letter size pdf download sheet
I have other table place card frames for 2x3" photos / inserts, with my designs, that can also be printed onto washable inkjet printer fabric, backed with Therm o Web HeatnBond interfacing, for re-usable table card frame ornaments.
I also have turkey, blueberry & pumpkin pie, and pumpkin carriage shaped, table card frame ornaments in my store!
Thank you!
Kristie Hubler
Maple leaf Thanksgiving holiday table place card holder photo frame ornament design, printable, pattern, & download copyright protected by Kristie Hubler / fabricatedframes.com at fabricatedframescom@gmail.com