LAMA Helicopter Fuselage for GooSky S1 Helicopter

3D model description

https://www.youtube.com/watch?v=ki5v92EgZGU

Turn your GooSky S1 Mini 3D RC helicopter into a beautiful SA315B LAMA Helicopter with this easy to put on, no screws need 3d Printed Fuselage parts.

GooSky S1 is a superb mini 3D Rc helicopter that you would love to fly as this legendary LAMA helicopter scale model.

Installation only requires to glue the tail sections on the tail of the helicopter, side frames to both side of frames with a dab of glue. no glue should touch or needed to be touched to frame.

glue the tail section to side frames with a tiny drop of CA glue.

I would highly recommend putting a tape piece on those thin strips on the cockpit to make them stronger yet still flexible and at the end you can add a tiny piece of velcro that will stick those end to frames and cockpit will stay strong and solid on helicopter. easy to install and remove as well on stock landing skids.

3D printing settings

print with your own settings

use supports.