Bella Ribbon Corset three-ways
On Sale
£10.00
£10.00
This is a modern under-bust pattern with a beautiful curve to accentuate your waist. Sizes (UK) 10 -20 (US 6 - 16). Three designs in one pattern - vertically panelled (A), ribbon front/ vertically panelled back (B) or, ribbon front & back (C). INCLUDES A 25 PAGE DOCUMENT OF CORSET CONSTRUCTION NOTES!
Note – a 2’’ back gap is factored into this pattern. If you would prefer your corset to close at the back, add 1’’ 13mm) to the edge of each panel 10.
The corset length measures 24.5cm at the centre front and 24.5cm at the back. A 2 or 3'' waist reduction is applied to the standard sizes below.
This pattern is drafted in AutoCAD and available as an instant download - you will need to print out on size letter (A) or A4 paper, making sure 'actual size' and 'centre the print' is ticked in your print dialogue box.
Measurements in cm (inches)
UK 10 12 14 16 18 20
USA 6 8 10 12 14 16
Continental (Europe) 38 40 42 44 46 48
Under-bust 79 (31") 84 (33") 89 (35") 94 (37") 99 (39'') 104 (41'')
Low rib 74 (29") 79 (31") 84 (33") 89 (35") 94 (37'') 99 (39'')
Waist 69 (27") 74 (29") 79 (31") 84 (33") 89 (35'') 94 (37'') - non cinched measurement (take 4'' off this for actual corset measurement with a 1'' back gap)
High hip 81 (32") 86 (34") 91 (36") 97 (38") 102 (40'') 107 (42'')
Full Hip 91 (36") 97 (38") 102 (40") 107 (42") 112 (44'') 117 (46'')
It is recommended that you make a toile to the largest of your measurements to check the fit of the pattern – at this stage you can take in the smaller of your measurements, lengthen if need be, and transfer these amendments to your pattern to ensure a perfect fitting corset.
Please take a look at my website www.corsetsbycaroline.co.uk where I have lots of information about corset making and where it is more cost-effective to buy this design (non EU countries only sorry).
There are no restrictions on the use of this pattern - use to your heart's content. I simply ask that you don't pass on the file or use it to, say, profit from a line of ready-to-wear corsets.
Note – a 2’’ back gap is factored into this pattern. If you would prefer your corset to close at the back, add 1’’ 13mm) to the edge of each panel 10.
The corset length measures 24.5cm at the centre front and 24.5cm at the back. A 2 or 3'' waist reduction is applied to the standard sizes below.
This pattern is drafted in AutoCAD and available as an instant download - you will need to print out on size letter (A) or A4 paper, making sure 'actual size' and 'centre the print' is ticked in your print dialogue box.
Measurements in cm (inches)
UK 10 12 14 16 18 20
USA 6 8 10 12 14 16
Continental (Europe) 38 40 42 44 46 48
Under-bust 79 (31") 84 (33") 89 (35") 94 (37") 99 (39'') 104 (41'')
Low rib 74 (29") 79 (31") 84 (33") 89 (35") 94 (37'') 99 (39'')
Waist 69 (27") 74 (29") 79 (31") 84 (33") 89 (35'') 94 (37'') - non cinched measurement (take 4'' off this for actual corset measurement with a 1'' back gap)
High hip 81 (32") 86 (34") 91 (36") 97 (38") 102 (40'') 107 (42'')
Full Hip 91 (36") 97 (38") 102 (40") 107 (42") 112 (44'') 117 (46'')
It is recommended that you make a toile to the largest of your measurements to check the fit of the pattern – at this stage you can take in the smaller of your measurements, lengthen if need be, and transfer these amendments to your pattern to ensure a perfect fitting corset.
Please take a look at my website www.corsetsbycaroline.co.uk where I have lots of information about corset making and where it is more cost-effective to buy this design (non EU countries only sorry).
There are no restrictions on the use of this pattern - use to your heart's content. I simply ask that you don't pass on the file or use it to, say, profit from a line of ready-to-wear corsets.
