Black Betty Boop in Army Fatigue / Camouflage/ Military Fatigue Jacket and hight heels DTF Transfer by Size

Allow up to 2 business days for printing, printing will not take place on Saturdays after 2pm or Sundays. DTF Transfers are made to order. Shipping is a flat rate of $7 regardless of how many transfers that you order and I will typically ship by UPS for transfers.

***These transfers are for fabric only and are not car or cup decals***

Print on Any Garment: DTF (Direct-to-Film) transfers are incredibly versatile, enabling vibrant and durable prints on any garment or material. Whether it's cotton, polyester, blends, or even leather.

Feel free to message me if you are not sure about something.

1. Position Your Design

Position your transfer in the desired location and make sure you are not pressing over large wrinkles. Heat-resistant tape is recommended when pressing on hats or when using a household iron to prevent the transfer from moving. You'll learn when it's needed with experience

2. Press

Press the transfer at 310°F / 155°C with medium to high pressure for 13 seconds. It is always recommended to test one piece first. You cannot damage the transfer by pressing with more heat, pressure, or time, however, it could scorch the garment.  

If your settings are scorching the garment, the first step would be to reduce pressure. If that doesn’t work, retain the reduced pressure and reduce the heat by 10-15°F. With a little practice, you’ll find the right settings for each garment and material.

3. Peel Cool After 15 Seconds

Wait 15 seconds (or more) and peel! If parts of the design are not sticking, lay it back down and press again with added pressure and heat (+15°F). If unsuccessful, increase heat by 15°F increments until it works. Remember, repeated pressing won't damage the transfer.

4. Final Press & Wash Instructions

Important: The final press is imperative to create a superior product.

After the design is transferred onto the garment, with the film peeled off, cover the design with parchment paper or a single layer of t-shirt material and press for ~15 seconds. By doing so, it enhances the value of your product by greatly improving the durability and softness as well as reducing the shine. For a glossy look, use a guard sheet for the second and final press instead. For best results and longevity, wash the garment inside out in cold water and dry on low heat or hang to dry. Washing it with standard settings is fine, but it lasts longer with more delicate settings.