CIVIL Engineering Q&A
1. Density of Steel
a. 6000 kg/m3
b. 5800 kg/m3
c. 7800 kg/m3
d. 8500 kg/m3
2. Density of Concrete
a. 1000 kg/m3
b. 3800 kg/m3
c. 2500 kg/m3
d. 1500 kg/m3
3. If the bolts are located outside the flanges of UC column close to web, then it is a
a. Hinge
b. Fixed
c. Sliding
d. None
4. If the bolts are located between flanges of the UC column far from the web then this is a
a. Hinge
b. Fixed
c. Sliding
d. None
5. What are the common type of slab/s?
a. Ribbed
b. Flat
c. Solid
d. All of the above
6. The distance between C.G of compression & C.G of tension flanges for a plate girder is called
a. Effective depth
b. None
c. Overall Depth
d. Clear Depth
7. Minimum distance between Bolts
a. 4dia
b. 3.5dia
c. 1.5dia
d. 2.5dia
8. Difference Between Secant and Contiguous Shoring system
a. Contiguos are over lapped
b. Secant are over lapped
c. Other
d. All secant piles are reinforced piles
9. Percentage of piles should be tested by static load test is
a. 100%
b. 1%
c. 10%
d. 5%
10. Minimum diameter of micro Pile is
a. 250mm
b. 300mm
c. 400mm
d. 500mm
Comments ()