HRKM - Headlight Relay Kit, Mini

HRKM - Headlight Relay Kit, Mini

  The Mini Relay Kit has everything you need to add relays to your headlight circuit - without cutting your wiring harness. It is equivalent to installing relays into your main harness like we did for years, but requires no modification to the wiring harness. The differences between this kit and the full kit are redundancy and controller size. This kit has only one controller with two relays and uses a wiring harness to control the opposite side. The Full and International kits have two controllers, one for each side, with twice the relays and three times the circuit protection.

Included in kit: 1 weatherproof controller, plug and play harness, 30A auto-reset circuit breaker, power wire, crimp-on connectors and easy to follow instructions.

Benefits:

• No cutting. The kit is 'plug and play'.
• If the controller goes bad, remove it. The OEM circuit will still work.
• Each 40/60 Amp 12 Volt sealed relay has Negative Spike Protection built into it. This means no spikes or feedback to upset delicate electronics.
• Compact size - controller is only 3x2x1.5.
• Kit comes with 35A circuit breaker to power 4 halogen lamps at 7.5A each and is auto resetting.
• Notes:
• ¹ If your vehicle does not have extension connectors you need the HRKU kit below.
• ² This kit contains the minimum needed to add relays to your headlight circuit. It is not recommended for use with bulbs stronger than the stock 5001, 5006 and 6014 incandescent or halogen equivalents.
• ³ It is the responsibility of the purchaser to ensure that the vehicle's wiring is in suitable condition to supply power to the installed lamps.