Sportster Front Sprocket Installation Bracket - STL File for 3D Printing

This is a bracket that I designed to properly tighten the front sprocket lock nut when doing the chain conversion on my 2002 Harley Davidson Sportster 883 XLH. This is the STL file, so you can 3D print it on your own.

It works for 23T front sprockets and is a great help. I can't guarantee fitment for other models other than mine (2002 Sportster and 23T front sprocket). However, I suspect that the bracket should work on most Sportsters if you install the 23T front sprocket. The front sprocket I installed is universal for 1982-2003 and I think the swingarm should also be the same for these models (but I'm not 100% sure). You have to print (100% infill) and test it for your setup...

Here's the YouTube video in which I use the bracket: https://youtu.be/2uWR5eS75TY

If you have any questions, feel free to shoot me a message to - motowrenchers.blog@gmail.com or leave a comment underneath the video.

Good luck with your chain conversion!

Joshua