Amberwick Glassworks - 4 Fantasy Workshop Models STL + CAD

Build an original fantasy glassworks scene with four detailed fixed models: Twin-Chimney Glass Furnace, Squirrel Glassworker, Decorative Window Display Arch and Six Bottle Cargo Handcart. Includes 4 STL meshes, 4 matching standalone editable OpenSCAD sources, 8 actual front/rear mesh renders, illustrated HTML catalog, dimensions, check reports and a personal-use license. Complete digital collection: $4.

Twin-Chimney Glass Furnace — Closed masonry furnace building with two shallow backed arched firing-door niches, fixed door-bar relief, heavy arch frames, threshold steps, tiled gable roof, ridge cap, two staggered square brick chimneys with shallow closed-bottom cap recesses, side sample vessel and closed supply crate. No heat or firing function.

Squirrel Glassworker — Original stylized squirrel artisan with recessed ears, backed eyes, muzzle and tooth, broad curled grounded tail, fluted coat, strapped apron, both hands holding a thick fixed blowpipe-like rod with a closed bulb-like form supported on an attached tool rest. Small work tray carries three fixed bead-like nodes. No glassblowing, heat or working tools.

Decorative Window Display Arch — Three unequal arched display panels held between capped posts on a stepped foot: thick opaque pane backings, raised mullions, rose-like tracery, spoke relief, hollow diamond-shaped relief over solid backings and shallow V-shaped leading detail. Two closed sample vessels on front pads. Monochrome solid geometry; no transparent glass or working window.

Six Bottle Cargo Handcart — Closed wooden cargo handcart with two fixed solid wheels and backed spoke relief, axle, six closed shaped vessels in three graduated pairs, two tall arch straps joined by roof-height rails and cross ties, raised panel staves, closed outside roll case, blank plaque, thick pull shafts and grounded pads. Every wheel and bottle is fixed; no usable transport or storage.Free preview catalog: browse the actual models before buying. The preview download contains images and inventory only, no STL or CAD files.

All four STLs passed watertight, consistent winding, positive volume, single connected body, flat Z=0 base and nonempty cross-section checks every 0.4 mm. All four exact CAD sources independently compiled in OpenSCAD with at most 0.02 mm bounds, 0.5% relative volume and 1% symmetric-difference volume error. All four exact STLs sliced in OrcaSlicer 2.4.2 using K1 SE 0.4 mm / Generic PLA / 0.16 mm layers / 3 walls / 15% infill / normal automatic supports aligned to model layers, base down. Every named slicer layer has extrusion; checked extrusion paths remain within that profile bed and height. Reports and hashes are included.

Images render the actual delivered meshes. Physical printing, support removal, fine-detail survival, strength and fit remain untested. Import STLs in millimeters, review your own supported slices and make trial prints at supplied dimensions before scaling down. Automatic supports were enabled in the recorded checks; customer G-code and pre-supported files are not included. Every model is one permanently fixed decorative assembly including all doors, tools, wheels, bottles, rod, bulb form, character and cargo. The furnace and vessels are closed, with shallow decorative recesses where noted; there is no usable firing chamber, chimney passage or storage. Window panels have thick opaque solid backings and raised tracery; no transparent glass or colored textures are included. The squirrel is a stylized fantasy creature, not an anatomical model. No moving mechanisms, actual glassworking, heat, fire, pressure, transport, calibrated tools or working light. No guaranteed common figure scale, named-game compatibility, painted finish, physical goods or game rules. Views are fitted separately; full dimensions are included.

CARTER GRACE STUDIO / PERSONAL USE LICENSE

Amberwick Glassworks, version 1.0.

Personal printing and gifts are permitted. You may edit your own CAD copy for personal use.

Selling physical prints is not included. Do not share, redistribute, resell or upload the digital files or their derivatives.

These are fixed decorative scenery assemblies. No commercial-print or Creative Commons license is included.

Copyright 2026 Matthew Carter / Carter Grace Studio, where applicable.