How to Apply Decision Rules and Statements of Conformity in Your Laboratory Based on ILAC-G8 - CalProGLOBAL-WPGd-026003 R0

Warning: This is NOT a copy paste document of the international guides and publications. If that's what you need, pls refer to the actual ISO publication. This document is a practical guide based on multiple laboratories and audit experience. Its basically a cheat sheet how to actually implement this in your own laboratory, how to handle audits, what to ask and answer and what docs to present and how to make to make those documents and records.

What you will get:

1. Introduction — Why Decision Rules Matter
2. What ISO/IEC 17025:2017 Requires
3. Key Definitions You Need to Know
4. The Guard Band Concept
5. Simple Acceptance — What Most Laboratories Use
6. Worked Example 1 — Digital Caliper Calibration (Length)
7. Worked Example 2 — Digital Ohmmeter Calibration (Electrical)
8. Worked Example 3 — Analytical Balance Calibration (Mass)
9. Decision Rule Selection — A Practical Flowchart
10. Quick Reference: TUR vs Risk
11. Authoritative References
12. Implementation Checklist for Your Laboratory

Best Suited for:

• Laboratory Approved Signatories (Existing and groomed successor)
• Laboratory Supervisor and Staff - to competently answer customer questions
• ISO 17025 Auditors
• QA and metrology specialist