Cloudwake Skyport - 4 Fantasy Scenery Models STL + CAD

Build an original fantasy skyport with four fixed scenery assemblies: Cloudsail Courier Airship, Skyport Mooring Tower, Aether Engine Handcart and Skyfreight Elevator Gantry. Includes 4 STL meshes, 4 matching standalone editable OpenSCAD sources, 8 front/rear mesh renders, illustrated HTML catalog, dimension inventory and software-check reports. Complete digital collection: $4.

Cloudsail Courier Airship — Original closed courier airship on an attached display cradle: elongated envelope, six bands and eight backed longitudinal seams, gondola, four fixed suspension struts, cabin, porthole relief, deck rails, cargo trunk, two closed engines, broad fixed propeller-like lobes and three tail fins. No flight, buoyancy or moving parts.

Skyport Mooring Tower — Four-post braced tower with crossed trusses, two levels of cross ties, nine solid-backed steps, fixed upper platform and rails, two capped mooring posts, bolt relief and a permanently attached closed lantern beacon. No usable lift, working light or guaranteed figure clearance.

Aether Engine Handcart — Original unbranded fantasy engine cart with four fixed solid wheels, backed spoke relief, paired sealed horizontal pods, flange collars, cradles, central capped stack, joined pipes, three backed gauges, thick shafts and grounded supports. No pressure, fuel, heat, electrical or propulsion function.

Skyfreight Elevator Gantry — Braced cargo gantry with two fixed pulley-like discs, backed spoke relief, thick rigid rope-like rods, raised platform on a solid support, two closed banded crates, fixed side rails, grounded closed winch and flange relief. No lifting, moving gate, storage or working mechanism.Free preview catalog: browse the actual models before buying. The preview download contains images and inventory only, no STL or CAD files.

All four STLs passed watertight, consistent winding, positive volume, single connected body, flat Z=0 base and nonempty cross-section checks every 0.4 mm. All four exact CAD sources independently compiled in OpenSCAD with at most 0.02 mm bounds, 0.5% relative volume and 1% symmetric-difference volume error. All four exact STLs sliced in OrcaSlicer 2.4.2 using K1 SE 0.4 mm / Generic PLA / 0.16 mm layers / 3 walls / 15% infill / normal automatic supports aligned to model layers, base down. Every named slicer layer has extrusion; checked extrusion paths remain within that profile bed and height. Reports and hashes are included.

Images render the actual delivered meshes. Physical printing, support removal, fine-detail survival, strength and fit remain untested. Import STLs in millimeters, review your own slices and make trial prints at the supplied size before scaling down. Automatic supports are used in the recorded software checks; customer G-code and pre-supported files are not included. Each model is a single fixed decorative assembly on its paving base, including the rigging, wheels, propeller-like lobes, pulleys and cargo. The airship and engine pods are closed; the tower stair has a solid underside and the elevator platform has a solid support. No moving mechanisms, working light or usable interiors. Views are fitted separately; full dimensions are included. Digital files only; physical goods, painted finish, textures, game rules and guaranteed figure clearance are not included.

CARTER GRACE STUDIO / PERSONAL USE LICENSE

Cloudwake Skyport, version 1.0.

Personal printing and gifts are permitted. You may edit your own CAD copy for personal use.

Selling physical prints is not included. Do not share, redistribute, resell or upload the digital files or their derivatives.

These are fixed decorative scenery assemblies. No commercial-print or Creative Commons license is included.

Copyright 2026 Matthew Carter / Carter Grace Studio, where applicable.