Visma Lease a Bike Jonas Vingegaard Lamp

Create your own Jonas Vingegaard cycling-inspired LED display lamp with this downloadable 3D print file.

Designed as a unique tabletop display piece, this lamp stands approximately 9.5 inches tall with a 5.10-inch diameter shade.

The detailed illuminated shade features a dimensional cycling design inspired by Jonas Vingegaard and professional road racing, while the bold yellow-and-black Team Visma-inspired base gives the lamp a striking look when displayed on a desk, shelf, bedside table, cycling room or pain cave.

When illuminated, the detailed shade comes to life with added depth and contrast, making the cycling artwork stand out beautifully.

This listing is for the DIGITAL FILES ONLY. No physical lamp, LED light, filament or other physical product will be shipped.

Finished Dimensions

• Approximate overall height: 9.5"
• Approximate shade diameter: 5.10"
• 
  

Recommended Print Settings

• Material: PLA
• Layer height: 0.16 mm
• Nozzle: 0.4 mm recommended
• Print at a moderate or slower speed to preserve the fine details in the shade and base
• Use good bed adhesion and a properly calibrated printer for the cleanest finish
• White or light-coloured PLA is recommended for the illuminated shade for the best light transmission and image detail

Print settings may require minor adjustments depending on your printer, filament brand and slicer.

Digital Download Includes

• 3D printable files required to create the lamp
• Printable lamp base and components
• Detailed cycling-inspired illuminated shade design

The finished lamp is designed to be paired with a compatible LED light source. An adjustable LED light with brightness and colour-temperature control works especially well, allowing you to switch between a soft warm glow and a brighter neutral light.

Please Note

This is a digital product. You will receive downloadable 3D printing files and will need access to a 3D printer, PLA filament and compatible LED lighting hardware to complete the lamp.

Actual print results may vary depending on printer calibration, filament, slicer settings and printing environment.

Unless otherwise stated in the included licence, purchasing these files does not grant permission to redistribute, share, upload or resell the digital files themselves.

Perfect for Jonas Vingegaard fans, cycling enthusiasts, road racing fans, desks, offices, cycling rooms, pain caves and anyone looking for a unique cycling-themed 3D printing project.