Grace demi-bust Corset Pattern
On Sale
£14.00
£14.00
This is a 14-panel over-bust corset pattern with a beautiful curve to accentuate your waist - a 3'' reduction on standard sizes. Sizes (UK) 8 -20 (US 4 - 16), approx. cup size A-DD. Attributes - flat top-line, swooping bottom line, low back. INCLUDES A 25 PAGE DOCUMENT OF CORSET CONSTRUCTION NOTES!
Note – a 2’’ back gap is factored into this pattern. If you would prefer your corset to close at the back, add 01’’ (12.2mm) to the edge of each panel 7.
The corset length measures 40cm at the centre front and 29.5cm at the back.
This pattern is drafted in AutoCAD and available as an instant download - you will need to print out on size letter (A) or A4 paper, making sure 'actual size' and 'centre the print' is ticked in your print dialogue box. Measurements in cm (inches)
IMPERIAL
UK dress size measured at (inches) above or below waist 8 10 12 14 16 18 20
US dress size 4 6 8 10 12 14 16
Bust (8) 32 34 36 38 40 42 44
Under-bust (4) 29 31 33 35 37 39 41
waist (natural) (0) 25 27 29 31 33 35 37
waist (cinched) (0) 22 24 26 28 30 32 34
high hip (-4) 30 32 34 36 38 40 42
METRIC
UK dress size measured at (cm) above or below waist 8 10 12 14 16 18 20
US dress size 4 6 8 10 12 14 16
Bust (20) 81 86 91 97 102 107 112
Under-bust (10) 74 79 84 89 94 99 104
waist (natural) (0) 64 69 79 84 89 94 99
waist (cinched) (0) 56 61 66 71 76 81 86
high hip (-10) 76 81 86 91 97 102 107
It is recommended that you make a toile to the largest of your measurements to check the fit of the pattern – at this stage you can take in the smaller of your measurements, lengthen if need be, and transfer these amendments to your pattern to ensure a perfect fitting corset!
Please take a look at my website www.corsetsbycaroline.co.uk where I have lots of information about corset making and where it is more cost-effective to buy this design (non EU countries only sorry).
There are no restrictions on the use of this pattern - use to your heart's content. I simply ask that you don't pass on the file or use it to, say, profit from a line of ready-to-wear corsets.
Note – a 2’’ back gap is factored into this pattern. If you would prefer your corset to close at the back, add 01’’ (12.2mm) to the edge of each panel 7.
The corset length measures 40cm at the centre front and 29.5cm at the back.
This pattern is drafted in AutoCAD and available as an instant download - you will need to print out on size letter (A) or A4 paper, making sure 'actual size' and 'centre the print' is ticked in your print dialogue box. Measurements in cm (inches)
IMPERIAL
UK dress size measured at (inches) above or below waist 8 10 12 14 16 18 20
US dress size 4 6 8 10 12 14 16
Bust (8) 32 34 36 38 40 42 44
Under-bust (4) 29 31 33 35 37 39 41
waist (natural) (0) 25 27 29 31 33 35 37
waist (cinched) (0) 22 24 26 28 30 32 34
high hip (-4) 30 32 34 36 38 40 42
METRIC
UK dress size measured at (cm) above or below waist 8 10 12 14 16 18 20
US dress size 4 6 8 10 12 14 16
Bust (20) 81 86 91 97 102 107 112
Under-bust (10) 74 79 84 89 94 99 104
waist (natural) (0) 64 69 79 84 89 94 99
waist (cinched) (0) 56 61 66 71 76 81 86
high hip (-10) 76 81 86 91 97 102 107
It is recommended that you make a toile to the largest of your measurements to check the fit of the pattern – at this stage you can take in the smaller of your measurements, lengthen if need be, and transfer these amendments to your pattern to ensure a perfect fitting corset!
Please take a look at my website www.corsetsbycaroline.co.uk where I have lots of information about corset making and where it is more cost-effective to buy this design (non EU countries only sorry).
There are no restrictions on the use of this pattern - use to your heart's content. I simply ask that you don't pass on the file or use it to, say, profit from a line of ready-to-wear corsets.
