The Crossover Under-bust Corset Pattern
On Sale
£10.00
£10.00
PATTERN! This is a modern 12-panel under-bust (with rear crossover shoulder strap) pattern with a beautiful curve to accentuate your waist. Sizes (UK) 10 -20 (US 6 - 16). Includes 25 page manual of construction notes!
Note – a 3’’ back gap is factored into this pattern to allow for the shoulder straps to be positioned correctly.
The corset length measures 37cm (14.5'') at the centre front and 34cm (13'') at the back. There is a reduction of 4'' at the waist applied to the standard sizes (see below).
This pattern is drafted in AutoCAD and available as an instant download - you will need to print out on size letter (A) or A4 paper, making sure 'actual size' and 'centre the print' is ticked in your print dialogue box. Instructions included.
IMPERIAL SIZES
UK dress size measured at (inches) above or below waist 10 12 14 16 18 20
US dress size 6 8 10 12 14 16
Under-bust (4) 31 33 35 37 39 41
waist (natural) (0) 27 29 31 33 35 37
waist (cinched) (0) 23 25 27 29 31 33
high hip (-4) 32 34 36 38 40 42
low hip (-6) 36 38 40 42 44 46
It is recommended that you make a toile to the largest of your measurements to check the fit of the pattern – at this stage you can take in the smaller of your measurements, lengthen or shorten if need be, and transfer these amendments to your pattern to ensure a perfect fitting corset!
Please take a look at my website www.corsetsbycaroline.co.uk where I have lots of information about corset making and where it is more cost-effective to buy this design (non EU countries only sorry).
There are no restrictions on the use of this pattern - use to your heart's content. I simply ask that you don't pass on the file or use it to, say, profit from a line of ready-to-wear corsets.
Note – a 3’’ back gap is factored into this pattern to allow for the shoulder straps to be positioned correctly.
The corset length measures 37cm (14.5'') at the centre front and 34cm (13'') at the back. There is a reduction of 4'' at the waist applied to the standard sizes (see below).
This pattern is drafted in AutoCAD and available as an instant download - you will need to print out on size letter (A) or A4 paper, making sure 'actual size' and 'centre the print' is ticked in your print dialogue box. Instructions included.
IMPERIAL SIZES
UK dress size measured at (inches) above or below waist 10 12 14 16 18 20
US dress size 6 8 10 12 14 16
Under-bust (4) 31 33 35 37 39 41
waist (natural) (0) 27 29 31 33 35 37
waist (cinched) (0) 23 25 27 29 31 33
high hip (-4) 32 34 36 38 40 42
low hip (-6) 36 38 40 42 44 46
It is recommended that you make a toile to the largest of your measurements to check the fit of the pattern – at this stage you can take in the smaller of your measurements, lengthen or shorten if need be, and transfer these amendments to your pattern to ensure a perfect fitting corset!
Please take a look at my website www.corsetsbycaroline.co.uk where I have lots of information about corset making and where it is more cost-effective to buy this design (non EU countries only sorry).
There are no restrictions on the use of this pattern - use to your heart's content. I simply ask that you don't pass on the file or use it to, say, profit from a line of ready-to-wear corsets.